BOXI 8pcs Front Lower Ball Joint Sway Bar & Inner and Outer Tie Rods Replacement for Ford Mustang 2005 2006 2007 2008 2009 2010 | K500033 K80899 EV80804 ES80805
BOXI SKU#: BXM00179-8
$72.71
BOXI 8-piece front suspension kit includes ball joints, sway bar links, and tie rods for Ford Mustang models 2005-2010. Replaces OE numbers K500033, K80899, EV80804, and ES80805. Verify fitment before ordering.
116 in stock
Placement on Vehicle: Front, Left, Lower, Right
Package Included:
2x Front Lower Ball Joints – K500033
2x Front Sway Bar End Links – K80899
2x Front Inner Tie Rod Ends – EV80804
2x Front Outer Tie Rod Ends – ES80805
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Ford Mustang 2005-2006 All Models
Replacement for Ford Mustang 2007-2010 Excluding Shelby Models; Built Before 8/2/09
Replacement OEM ( Original Equipment Part) Number: K500033 K80899 EV80804 ES80805
Package Included:
2x Front Lower Ball Joints – K500033
2x Front Sway Bar End Links – K80899
2x Front Inner Tie Rod Ends – EV80804
2x Front Outer Tie Rod Ends – ES80805
Placement on Vehicle: Front, Left, Lower, Right
| Weight | 10.05 lbs |
|---|---|
| Dimensions | 14.45 × 6.18 × 3.39 in |
| Brand | BOXI |
| Condition | New |
| Rod End Thread Gender | Male |
| Rack End Thread Gender | Male |
| Ball Stud Type | Threaded |
| Ball Stud Housing Material | Steel |
| Ball Stud Bearing Material | Polymer |
| Lock Washer Included | No |
| Dust Boot Included | No |
| Adjusting Sleeve Included | No |
| Grease Fitting Included | No |
| Greaseable | No |
| Washers Included | Yes |
| Pre-Greased | Yes |
| Castle Nut Included | No |
| Cotter Pin Included | No |
| Lock Nut Included | No |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2005 – 2010 | Ford | Mustang | Base | V6 – 4.0L 245ci GAS MFI vin N – 2 valve SOHC |
| V8 – 4.6L 281ci GAS MFI vin H – 3 valve SOHC | ||||
| GT | V8 – 4.6L 281ci GAS MFI vin H – 3 valve SOHC | |||
| 2008 – 2009 | Ford | Mustang | Bullitt | V8 – 4.6L 281ci GAS MFI vin H – 3 valve SOHC |
| Shelby GT500KR | V8 – 5.4L 330ci GAS MFI Supercharged vin S – 4 valve DOHC | |||
| 2005 – 2008 | Ford | Mustang | GT Base | V8 – 4.6L 281ci GAS MFI vin H – 3 valve SOHC |
| 2005 – 2009 | Ford | Mustang | GT Equipado | V8 – 4.6L 281ci GAS MFI vin H – 3 valve SOHC |
| 2007 – 2009 | Ford | Mustang | Lujo | V6 – 4.0L 245ci GAS MFI vin N – 2 valve SOHC |
| V8 – 4.6L 281ci GAS MFI vin H – 3 valve SOHC | ||||
| 2009 – 2010 | Ford | Mustang | Shelby | V8 – 5.4L 330ci GAS MFI Supercharged vin S – 4 valve DOHC |
| 2007 – 2008 | Ford | Mustang | Shelby GT | V8 – 4.6L 281ci GAS MFI vin H – 3 valve SOHC |
| 2007 – 2010 | Ford | Mustang | Shelby GT500 | V8 – 5.4L 330ci GAS MFI Supercharged vin S – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00060-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodBolt-On
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00063-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.25
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.