BOXI Front Inner Tie Rod End Fit for Hon-da Pilot 2003 2004 2005 2006 2007 2008 / for Acu-ra MDX 2001 2002 2003 2004 2005 2006 | 53010-S9V-A01, EV471
BOXI SKU#: BX02400005-1
$8.09
BOXI Front Inner Tie Rod End for Honda Pilot 2003-2008 and Acura MDX 2001-2006, replaces OE numbers EV471 and 53010-S9V-A01. Verify fitment before ordering.
364 in stock
Placement on Vehicle: Front, Left or Right
Package Included: 1x Inner Tie Rod End
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
for HON-DA PILOT YF1 2003-2008
for ACU-RA MDX YD1 2001-2006
Replacement OEM ( Original Equipment Part) Number:EV471 46A0989A 53010-S9V-A01 88876698
Package Included:1 Tie Rod End
| Weight | 1.15 lbs |
|---|---|
| Dimensions | 11.46 × 1.69 × 1.57 in |
| Brand | BOXI |
| Condition | New |
| Dust Boot Included | No |
| Adjusting Sleeve Included | No |
| Grease Fitting Included | No |
| Rod End Thread Gender | Male |
| Greaseable | No |
| Rack End Thread Gender | Male |
| Pre-Greased | Yes |
| Ball Stud Type | Threaded |
| Castle Nut Included | No |
| Ball Stud Housing Material | High Strength Steel |
| Cotter Pin Included | No |
| Ball Stud Bearing Material | Polymer |
| Lock Nut Included | Yes |
| Lock Washer Included | No |
| Fitment Type | Direct Replacement |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2001 – 2006 | Acura | MDX | Base Touring | V6 – 3.5L 3471cc GAS MFI type J35A3 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A5 – 4 valve SOHC | ||||
| 2003 – 2008 | Honda | Pilot | EX LX | V6 – 3.5L 3471cc GAS MFI type J35A6 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | ||||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC | ||||
| V6 – 3.5L 3475cc GAS MFI type J35A4 – 4 valve SOHC | ||||
| 2004 – 2008 | Honda | Pilot | EX-L | V6 – 3.5L 3471cc GAS MFI type J35A6 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | ||||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC | ||||
| V6 – 3.5L 3475cc GAS MFI type J35A4 – 4 valve SOHC | ||||
| 2008 | Honda | Pilot | SE-L | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC |
| Special Edition Value Package | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | |||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC |
Related products
-
Warranty: Two Year
- SKUBXM00116-5
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Dust Boot ColorBlack
- Adjusting Sleeve IncludedNo
- Dust Boot IncludedYes
- Castle Nut IncludedNo
- Grease Fitting IncludedYes
- Cotter Pin IncludedNo
- GreaseableYes
- Lock Nut IncludedNo
- Pre-GreasedYes
- Lock Washer IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400002-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderFemale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedYes
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedYes
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedNo
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00057-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh-Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread Size3/4-16 Inch
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00106-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Ball Stud Bearing MaterialSintered Metal
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderMale
- Rack End Thread GenderFemale
- Grease Fitting IncludedYes
- Dust Boot IncludedNo
- GreaseableYes
- Adjusting Sleeve IncludedNo
- Washers IncludedYes
- Lock Washer IncludedNo
- Pre-GreasedYes
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Lock Nut IncludedYes
- Warranty TermsTwo Year
Reviews
There are no reviews yet.