BOXI ES3716 Steering Tie Rod End for Acura MDX YD1 2001-2006 / for Honda Pilot 2003-2008 / Replace# 53540S3VA02
BOXI SKU#: BX02400012-1
$11.09
BOXI Steering Tie Rod End compatible with Acura MDX 2001-2006 and Honda Pilot 2003-2008. Replaces OE numbers ES3716 and 53540S3VA02. Verify fitment before ordering.
21 in stock
Placement on Vehicle: Right, Outer
Package Included: 1x Right Outer Tie Rod End
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
for ACU-RA MDX YD1 2001-2006
for HON-DA PILOT 2003-2008
Replacement OEM ( Original Equipment Part) Number:ES3716 45A0995 53540S3VA02 19160170
Package Included:1 Right Outer Tie Rod End
| Weight | 1.97 lbs |
|---|---|
| Dimensions | 10.51 × 3.78 × 2.32 in |
| Brand | BOXI |
| Condition | New |
| Dust Boot Included | Yes |
| Adjusting Sleeve Included | No |
| Dust Boot Material | Chloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Rod End Thread Gender | Female |
| Greaseable | No |
| Pre-Greased | Yes |
| Ball Stud Type | Threaded |
| Castle Nut Included | No |
| Ball Stud Housing Material | High Strength Steel |
| Cotter Pin Included | No |
| Ball Stud Bearing Material | Polymer |
| Lock Nut Included | Yes |
| Dust Boot Color | Black |
| Lock Washer Included | No |
| Fitment Type | Direct Replacement |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2001 – 2006 | Acura | MDX | Base Touring | V6 – 3.5L 3471cc GAS MFI type J35A3 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A5 – 4 valve SOHC | ||||
| 2003 – 2008 | Honda | Pilot | EX LX | V6 – 3.5L 3471cc GAS MFI type J35A6 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | ||||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC | ||||
| V6 – 3.5L 3475cc GAS MFI type J35A4 – 4 valve SOHC | ||||
| 2004 – 2008 | Honda | Pilot | EX-L | V6 – 3.5L 3471cc GAS MFI type J35A6 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | ||||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC | ||||
| V6 – 3.5L 3475cc GAS MFI type J35A4 – 4 valve SOHC | ||||
| 2008 | Honda | Pilot | SE-L | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC |
| Special Edition Value Package | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | |||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC |
Related products
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00100-2
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Number Of Nuts2
- Dust Boot IncludedYes
- Bolts IncludedNo
- Lock Nuts IncludedYes
- Bushings IncludedNo
- GreaseableYes
- Sleeves IncludedNo
- Pre-GreasedYes
- Grease Fittings IncludedNo
- Washers IncludedNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00043-10
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Pre-GreasedYes
- Adjusting Sleeve IncludedNo
- Lock Nut IncludedYes
- Lock Washer IncludedNo
- Dust Boot IncludedNo
- Grease Fitting IncludedNo
- GreaseableNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.