BOXI (Set of 6) Front Inner Tie Rod Ends + Upper & Lower Ball Joints Suspension Kit Fit for Toyota Tacoma 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 | Replace K90260 K90261 K90256 K90257 EV409
BOXI SKU#: BXM600330005-6
$65.99
BOXI front suspension kit includes tie rod ends and ball joints for Toyota Tacoma 1995-2004 models. Compatible with OE numbers K90260, K90261, K90256, K90257, EV409. Verify fitment before ordering.
95 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
1x Front Left Lower Ball Joint- K90260
1x Front Right Lower Ball Joint- K90261
1x Front Left Upper Ball Joint – K90256
1x Front Right Upper Ball Joint – K90257
2x Front Inner Tie Rod Ends – EV409
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
**FITS 2WD MODELS ONLY**
Fit for Toyota Tacoma 1995 – 2004 (Models w/ Power Steering, Excluding Pre Runner)
Replacement OEM (Original Equipment Part) Number: K90260 K90261 K90256 K90257 EV409
Placement on Vehicle: Front, Left, Right
Package Included:
1x Front Left Lower Ball Joint- K90260
1x Front Right Lower Ball Joint- K90261
1x Front Left Upper Ball Joint – K90256
1x Front Right Upper Ball Joint – K90257
2x Front Inner Tie Rod Ends – EV409
| Weight | 10.9 lbs |
|---|---|
| Dimensions | 12.64 × 5.08 × 3.94 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1995 – 2004 | Toyota | Tacoma | Base | L4 – 2.4L 2438cc GAS MFI vin L type 2RZ-FE – 4 valve DOHC |
| L4 – 2.4L 2438cc GAS MFI vin U type 2RZ-FE – 4 valve DOHC | ||||
| L4 – 2.7L 2694cc GAS MFI vin M type 3RZ-FE – 4 valve DOHC | ||||
| L4 – 2.7L 2694cc GAS MFI vin U type 3RZ-FE – 4 valve DOHC | ||||
| V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC | ||||
| 1995 – 2003 | Toyota | Tacoma | DLX | L4 – 2.4L 2438cc GAS MFI vin L type 2RZ-FE – 4 valve DOHC |
| L4 – 2.4L 2438cc GAS MFI vin U type 2RZ-FE – 4 valve DOHC | ||||
| L4 – 2.7L 2694cc GAS MFI vin M type 3RZ-FE – 4 valve DOHC | ||||
| L4 – 2.7L 2694cc GAS MFI vin U type 3RZ-FE – 4 valve DOHC | ||||
| V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC | ||||
| 2001 – 2004 | Toyota | Tacoma | S-Runner | V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC |
| 1998 – 2000 | Toyota | Tacoma | SR5 | L4 – 2.4L 2438cc GAS MFI vin L type 2RZ-FE – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00043-10
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Pre-GreasedYes
- Adjusting Sleeve IncludedNo
- Lock Nut IncludedYes
- Lock Washer IncludedNo
- Dust Boot IncludedNo
- Grease Fitting IncludedNo
- GreaseableNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400013-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00093-4
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Pre-GreasedYes
- Grease Fitting IncludedNo
- Castle Nut IncludedYes
- GreaseableNo
- Cotter Pin IncludedYes
- Lock Nut IncludedNo
- Lock Washer IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.