BOXI (Set of 4) Front Inner And Outer Tie Rods Fit for Chevrolet Chevy Camaro 2010 2011 2012 2013 2014 2015 Complete Suspension Rod Kit | Replaces ES800939 EV800885
BOXI SKU#: BXM600070050-4
$49.99
BOXI front inner and outer tie rod set for 2010-2015 Chevrolet Camaro. Replaces OEM numbers ES800939 and EV800885. Verify fitment before ordering.
110 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2x Outer Tie Rod Ends – Driver and Passenger Side – ES800939
2x Inner Tie Rod Ends – EV800885
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Chevrolet Camaro 2010-2011
Fit for Chevrolet Camaro 2012 (V8 6.2L Models Excluding Supercharged)
Fit for Chevrolet Camaro 2012-2015 (V6 3.6L)
Replacement OEM ( Original Equipment Part) Number:ES800939 EV800885
Placement on Vehicle:Front, Left, Right
Kit Includes:
2x Outer Tie Rod Ends – Driver and Passenger Side – ES800939
2x Inner Tie Rod Ends – EV800885
| Weight | 5.36 lbs |
|---|---|
| Dimensions | 13.86 × 4.33 × 2.72 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2011 – 2012 | Chevrolet | Camaro | 1LT | V6 – 3.6L 3564cc 217ci GAS DI vin 3 type LFX – 4 valve DOHC |
| V6 – 3.6L 3564cc 217ci GAS DI vin D type LLT – 4 valve DOHC | ||||
| 1SS 2SS | V8 – 6.2L 6162cc 376ci GAS MFI vin W type LS3 – 2 valve OHV | |||
| 2010 – 2015 | Chevrolet | Camaro | LS LT | V6 – 3.6L 3564cc 217ci GAS DI vin 3 type LFX – 4 valve DOHC |
| V6 – 3.6L 3564cc 217ci GAS DI vin D type LLT – 4 valve DOHC | ||||
| V6 – 3.6L 3564cc 217ci GAS DI vin V type LLT – 4 valve DOHC | ||||
| 2010 – 2012 | Chevrolet | Camaro | SS | V8 – 6.2L 6162cc 376ci GAS MFI vin J type L99 – 2 valve OHV |
| V8 – 6.2L 6162cc 376ci GAS MFI vin W type LS3 – 2 valve OHV |
Related products
-
Warranty: Two Year
- SKUBXM00081-7
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialChloroprene Rubber (CR)
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rack End Thread GenderMale
- Rod End Thread GenderFemale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- GreaseableYes
- Grease Fitting IncludedNo
- Pre-GreasedYes
- Lock Washer IncludedNo
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Lock Nut Included:Yes
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400012-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00038-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00067-12
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialSintered Metal
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.75
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.