Free Shipping on All Orders — Plus Local Delivery & Pick-Up Options!

BOXI (Set of 14) Front Pitman Idler Arm Sway Bar Link Ball Joint Tie Rod w/Adjusting Sleeve Suspension Kit Fit for Ram 2500 3500 1994-1999 2WD | K7238 K7225 K7206 K7269 K7275 ES2080 ES3171 ES3172

BOXI SKU#: BXM00124-14

$129.99

BOXI 14-piece front suspension kit for 1994-1999 Dodge Ram 2500/3500 2WD. Includes pitman arm, idler arm, ball joints, tie rods. Replaces OE# K7238 K7225 K7206 K7269 K7275 ES2080 ES3171 ES3172. Verify fitment before ordering.

  • Two Year Warranty

32 in stock

Placement on Vehicle: Front, Left, Lower, Right, Upper
Package Included:
1x Front Idler Arm [w/16mm bolts] – K7225
1x Front Pitman Arm – K7238
2x Front Upper Ball Joint – K7206
2x Front Lower Ball Joint – K7269
2x Front Stabilizer Sway Bar End Link – K7275
2x Front Adjusting Sleeve – ES2080
2x Front Inner Tie Rod End – ES3171
2x Front Outer Tie Rod End – ES3172

Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.

Fitment:
**FITS 2WD (2-Wheel Drive) MODELS ONLY**
**16mm Bracket Bolt Holes on Idler Arm**
Fit for Dodge Ram 2500 1994-1999 (All 2WD Models ONLY ; w/ 8800 lbs. GVW; Rear Wheel Drive; Right/Left; 1994: 16MM Bracket Holes)
Fit for Dodge Ram 3500 1994-1999 (All 2WD Models ONLY ; Rear Wheel Drive Independent Front Suspension; Right/Left; 1994: 16MM Bracket Holes)

Replacement OEM ( Original Equipment Part) Number:K7238 K7225 K7206 K7269 K7275 ES2080 ES3171 ES3172

Placement on Vehicle:Front, Left, Lower, Right, Upper

Kit Includes:
1x Front Idler Arm [w/16mm bolts] – K7225
1x Front Pitman Arm – K7238
2x Front Upper Ball Joint – K7206
2x Front Lower Ball Joint – K7269
2x Front Stabilizer Sway Bar End Link – K7275
2x Front Adjusting Sleeve – ES2080
2x Front Inner Tie Rod End – ES3171
2x Front Outer Tie Rod End – ES3172

Weight 27.5 lbs
Dimensions 11.4 × 8.6 × 5.9 in
Brand

BOXI
Condition

New
Ball Stud Housing Material

Steel
Ball Joint Bearing Material

Metal
Ball Stud Type

Threaded
Dust Boot Material

Neoprene
Ball Stud Thread Size

M14-1.50
Ball Stud Nut Wrench Size

22mm
Attachment Method

Press-In
Adjustable

No
Dust Boot Included

Yes
Greaseable

No
Grease Fitting Included

Yes
Washer Included

No
Pre-Greased

Yes
Mounting Plate Included

No
Castle Nut Included

Yes
Locking Nut Included

No
Cotter Pin Included

Yes
C Clips Included

No
Warranty Terms

Two Year
YearMakeModelSubmodelEngine
1994 – 1999DodgeRam 2500BaseL6 – 5.9L 359ci DIESEL DI Turbocharged vin 6 – 4 valve OHV
L6 – 5.9L 359ci DIESEL DI Turbocharged vin D – 2 valve OHV
L6 – 5.9L 359ci DIESEL MFI Turbocharged vin C – 2 valve OHV
V10 – 8.0L 7990cc 488ci GAS MFI vin W – 2 valve OHV
V8 – 5.2L 5211cc 318ci CNG MFI vin T – 2 valve OHV
V8 – 5.2L 5211cc 318ci GAS MFI vin Y – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin 5 – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV
V8 – 5.9L 360ci GAS MPI – 2 valve OHV
V8 – 5.9L 360ci GAS MPI – 2 valve SOHC
1995 – 1999DodgeRam 2500CustomL6 – 5.9L 359ci DIESEL DI Turbocharged vin D – 2 valve OHV
V8 – 5.2L 5211cc 318ci GAS MFI vin Y – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin 5 – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV
V8 – 5.9L 360ci GAS MPI – 2 valve OHV
V8 – 5.9L 360ci GAS MPI – 2 valve SOHC
1996 – 1997DodgeRam 2500LaramieV8 – 5.9L 360ci GAS MFI vin 5 – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV
1995 – 1998DodgeRam 2500LimitedV8 – 5.9L 360ci GAS MFI vin 5 – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV
1995DodgeRam 2500LujoV8 – 5.9L 360ci GAS MFI vin 5 – 2 valve OHV
1995 – 1997DodgeRam 2500RunnerV8 – 5.9L 360ci GAS MFI vin 5 – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV
V8 – 5.9L 360ci GAS MPI – 2 valve OHV
1999DodgeRam 2500SLTV8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV
V8 – 5.9L 360ci GAS MPI – 2 valve OHV
1994 – 1999DodgeRam 3500BaseL6 – 5.9L 359ci DIESEL DI Turbocharged vin 6 – 4 valve OHV
L6 – 5.9L 359ci DIESEL DI Turbocharged vin D – 2 valve OHV
L6 – 5.9L 359ci DIESEL MFI Turbocharged vin C – 2 valve OHV
V10 – 8.0L 7990cc 488ci GAS MFI vin W – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin 5 – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV
1995 – 1999DodgeRam 3500CustomV8 – 5.9L 360ci GAS MFI vin 5 – 2 valve OHV
V8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV
1999DodgeRam 3500SLTV8 – 5.9L 360ci GAS MFI vin Z – 2 valve OHV

Reviews

There are no reviews yet.

Be the first to review “BOXI (Set of 14) Front Pitman Idler Arm Sway Bar Link Ball Joint Tie Rod w/Adjusting Sleeve Suspension Kit Fit for Ram 2500 3500 1994-1999 2WD | K7238 K7225 K7206 K7269 K7275 ES2080 ES3171 ES3172”

Your email address will not be published. Required fields are marked *

Related products

  • BOXI Set of 2 Tie Rod End Kit Fit for Acura MDX 2001 2002 2003 2004 2005 2006 / for Honda Pilot 2003 2004 2005 2006

    BOXI Set of 2 Tie Rod End Kit Fit for Acura MDX 2001 2002 2003 2004 2005 2006 / for Honda Pilot 2003 2004 2005 2006 2007 2008-3.5L V6 / Replaces ES3716 ES3717

    $28.15
    Add to cartDone
    Warranty: Two Year
    • SKUBX024012013-2
    • BrandBOXI
    • ConditionNew
    • Dust Boot IncludedYes
    • Adjusting Sleeve IncludedNo
    • Dust Boot MaterialChloroprene Rubber (CR)
    • Grease Fitting IncludedNo
    • Rod End Thread GenderFemale
    • GreaseableNo
    • Rack End Thread GenderMale
    • Pre-GreasedYes
    • Ball Stud TypeThreaded
    • Castle Nut IncludedNo
    • Ball Stud Housing MaterialHigh Strength Steel
    • Cotter Pin IncludedNo
    • Ball Stud Bearing MaterialPolymer
    • Lock Nut IncludedYes
    • Dust Boot ColorBlack
    • Lock Washer IncludedNo
    • Fitment Type Direct Replacement
    • Warranty TermsTwo Year
  • BOXI 8pcs Front Upper Lower Ball Joints Inner Outer Tie Rods Kit for Toyota Tacoma 1995-2004 (4WD Models Only) / Tacoma

    BOXI 8pcs Front Upper Lower Ball Joints Inner Outer Tie Rods Kit for Toyota Tacoma 1995-2004 (4WD Models Only) / Tacoma 1998-2004 (Pre Runner RWD) | K90259 K90258 K90255 EV433 ES3546 ES3545

    $97.56
    Add to cartDone
    Warranty: Two Year
    • SKUBXM00060-8
    • BrandBOXI
    • ConditionNew
    • Ball Stud Housing MaterialSteel
    • Dust Boot MaterialRubber
    • Ball Joint Bearing MaterialMetal
    • Ball Stud TypeThreaded
    • Attachment MethodBolt-On
    • Ball Stud Thread SizeM16-1.50
    • Ball Stud Nut Wrench Size17mm
    • AdjustableNo
    • Dust Boot IncludedYes
    • Locking Nut IncludedNo
    • Grease Fitting IncludedYes
    • C Clips IncludedNo
    • Pre-GreasedYes
    • GreaseableYes
    • Castle Nut IncludedYes
    • Washer IncludedNo
    • Cotter Pin IncludedYes
    • Mounting Plate IncludedNo
    • Warranty TermsTwo Year
  • BOXI 12pcs Front Ball Joints Sway Bars Tie Rod Idler Arm for Cadillac Escalade ESV EXT/for Chevy Avalanche 1500

    BOXI 12pcs Front Ball Joints Sway Bars Tie Rod Idler Arm for Cadillac Escalade ESV EXT/for Chevy Avalanche 1500 Silverado 1500 Suburban 1500 Tahoe/for GMC Sierra 1500 Yukon Yukon XL 1500 | K6541

    $81.99
    Add to cartDone
    Warranty: Two Year
    • SKUBXM00067-12
    • BrandBOXI
    • ConditionNew
    • Ball Stud Housing MaterialSteel
    • Dust Boot MaterialNeoprene
    • Ball Joint Bearing MaterialSintered Metal
    • Ball Stud TypeTapered
    • Attachment MethodPress-In
    • Ball Stud Thread SizeM12-1.75
    • Ball Stud Nut Wrench Size17mm
    • AdjustableNo
    • Dust Boot IncludedYes
    • Locking Nut IncludedNo
    • Grease Fitting IncludedYes
    • C Clips IncludedYes
    • Pre-GreasedYes
    • GreaseableYes
    • Castle Nut IncludedYes
    • Washer IncludedNo
    • Cotter Pin IncludedYes
    • Mounting Plate IncludedNo
    • Warranty TermsTwo Year
  • BOXI Front Inner Tie Rod End Fit for Hon-da Pilot 2003 2004 2005 2006 2007 2008 / for Acu-ra MDX 2001 2002 2003 2004

    BOXI Front Inner Tie Rod End Fit for Hon-da Pilot 2003 2004 2005 2006 2007 2008 / for Acu-ra MDX 2001 2002 2003 2004 2005 2006 | 53010-S9V-A01, EV471

    $8.09
    Add to cartDone
    Warranty: Two Year
    • SKUBX02400005-1
    • BrandBOXI
    • ConditionNew
    • Dust Boot IncludedNo
    • Adjusting Sleeve IncludedNo
    • Grease Fitting IncludedNo
    • Rod End Thread GenderMale
    • GreaseableNo
    • Rack End Thread GenderMale
    • Pre-GreasedYes
    • Ball Stud TypeThreaded
    • Castle Nut IncludedNo
    • Ball Stud Housing MaterialHigh Strength Steel
    • Cotter Pin IncludedNo
    • Ball Stud Bearing MaterialPolymer
    • Lock Nut IncludedYes
    • Lock Washer IncludedNo
    • Fitment TypeDirect Replacement
    • Warranty TermsTwo Year

Join Our Newsletter Now

Register now to get updates on promotions