BOXI (Set of 4) Front Outer Tie Rod End + Pitman Arm + Idler Arm fit for Toyota 4Runner 1991 / for Toyota Pickup 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 4WD / Replaces ES2376 K9422 K9424
BOXI SKU#: BXM600330108-4
$53.57
BOXI Front Outer Tie Rod End, Pitman Arm, and Idler Arm Set for Toyota 4Runner 1991 and Pickup 1986-1995 4WD. Replaces ES2376, K9422, K9424. Verify fitment before ordering.
63 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2x Front Outer Tie Rod End ES2376
1x Pitman Arm – K9422
1x Idler Arm – K9424
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Toyota 4Runner 1991
Fit for Toyota Pickup 1986-1995 4WD
Fit OEM (Original Equipment Part) Number:ES2376 K9422 K9424
Placement on Vehicle:Front, Left, Right
Kit Includes:
2x Front Outer Tie Rod End ES2376
1x Pitman Arm – K9422
1x Idler Arm – K9424
| Weight | 10.2 lbs |
|---|---|
| Dimensions | 11.8 × 8.26 × 2.75 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1991 | Toyota | 4Runner | SR5 | L4 – 2.4L 2366cc GAS MFI vin R type 22RE – 2 valve SOHC |
| V6 – 3.0L 2959cc GAS MFI vin V type 3VZ-E – 2 valve SOHC | ||||
| 1986 – 1995 | Toyota | Pickup | Base DLX | L4 – 2.4L 2366cc GAS 2BBL vin R type 22R – 2 valve SOHC |
| L4 – 2.4L 2366cc GAS MFI vin R type 22RE – 2 valve SOHC | ||||
| L4 – 2.4L 2366cc GAS MFI vin R type 22REC – 2 valve SOHC | ||||
| V6 – 3.0L 2959cc GAS MFI vin V type 3VZ-E – 2 valve SOHC | ||||
| SR5 | L4 – 2.4L 2366cc GAS MFI vin R type 22RE – 2 valve SOHC | |||
| L4 – 2.4L 2366cc GAS MFI vin R type 22REC – 2 valve SOHC | ||||
| V6 – 3.0L 2959cc GAS MFI vin V type 3VZ-E – 2 valve SOHC | ||||
| 1986 – 1987 | Toyota | Pickup | Base Turbo | L4 – 2.4L 2366cc GAS MFI Turbocharged vin R type 22R-TEC – 2 valve SOHC |
| LN55 DLX | L4 – 2.4L 2466cc DIESEL vin L | |||
| RN63 | L4 – 2.4L 2366cc GAS 2BBL vin R type 22R – 2 valve SOHC | |||
| 1987 | Toyota | Pickup | LN67 | L4 – 2.4L 2466cc DIESEL vin L |
| 1986 | Toyota | Pickup | LN76 | L4 – 2.4L 2466cc DIESEL vin L |
| 1993 | Toyota | Pickup | RN02 | L4 – 2.4L 2366cc GAS MFI vin R type 22RE – 2 valve SOHC |
| 1986 – 1988 | Toyota | Pickup | SR5 Turbo | L4 – 2.4L 2366cc GAS MFI Turbocharged vin R type 22R-TEC – 2 valve SOHC |
Related products
-
Warranty: Two Year
- SKUBXM00031-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialSintered Metal
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00067-12
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialSintered Metal
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.75
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00076-7
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialChloroprene Rubber (CR)
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rack End Thread GenderMale
- Rod End Thread GenderFemale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- GreaseableYes
- Grease Fitting IncludedNo
- Pre-GreasedYes
- Lock Washer IncludedNo
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Lock Nut Included:Yes
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00038-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
![BOXI 7pc Front Tie Rods + Idler & Pitman Arms [4-Groove] Fit for Cadillac Escalade for Chevy Silverado Avalanche](https://assets.tetronauto.com/uploads/2024/12/BXM00076-7-1-300x300.jpg)
Reviews
There are no reviews yet.