BOXI 4pcs Front Lower Ball Joints & Outer Tie Rods Fit for Mitsubishi Mighty Max 1990 1991 1992 1993 1994 1995 1996 / for Dodge Ram 50 1990 1991 1992 1993 – Fit 2WD Only | ES3156 K9346
BOXI SKU#: BXM600230001-4
$33.56
BOXI front lower ball joints and outer tie rods for Mitsubishi Mighty Max (1990-1996) and Dodge Ram 50 (1990-1993). OE replacements ES3156 and K9346. Verify fitment before ordering.
41 in stock
Placement on Vehicle:Front, Left, Lower, Right
Package Included:
2 x Front Outer Tie Rod Ends – Driver and Passenger Side -ES3156
2 x Front Lower Ball Joints – Driver and Passenger Side – K9346
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Mitsubishi Mighty Max 1990-1996 (2WD)
Replacement for Dodge Ram 50 1990-1993 (2WD)
Replacement OEM ( Original Equipment Part) Number: ES3156 K9346
Placement on Vehicle: Front, Left, Lower, Right
Package Included:
2x Front Outer Tie Rod Ends – Driver and Passenger Side -ES3156
2x Front Lower Ball Joints – Driver and Passenger Side – K9346
| Weight | 5.03 lbs |
|---|---|
| Dimensions | 6.3 × 4.72 × 3.35 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1990 – 1993 | Dodge | Ram 50 | Base SE | L4 – 2.4L 2351cc GAS MFI vin G type 4G64 – 2 valve SOHC |
| L4 – 2.4L 2351cc GAS MFI vin W type 4G64 – 2 valve SOHC | ||||
| V6 – 3.0L 2972cc 181ci GAS MFI vin S type 6G72 – 2 valve SOHC | ||||
| 1990 – 1991 | Dodge | Ram 50 | LE | L4 – 2.4L 2351cc GAS MFI vin W type 4G64 – 2 valve SOHC |
| V6 – 3.0L 2972cc 181ci GAS MFI vin S type 6G72 – 2 valve SOHC | ||||
| 1990 – 1992 | Mitsubishi | Mighty Max | 1 Ton | L4 – 2.4L 2351cc GAS MFI vin W type 4G64 – 2 valve SOHC |
| V6 – 3.0L 2972cc 181ci GAS MFI vin S type 6G72 – 2 valve SOHC | ||||
| 1990 – 1996 | Mitsubishi | Mighty Max | Base | L4 – 2.4L 2351cc GAS MFI vin G type 4G64 – 2 valve SOHC |
| L4 – 2.4L 2351cc GAS MFI vin W type 4G64 – 2 valve SOHC | ||||
| V6 – 3.0L 2972cc 181ci GAS MFI vin H type 6G72 – 2 valve SOHC | ||||
| V6 – 3.0L 2972cc 181ci GAS MFI vin S type 6G72 – 2 valve SOHC |
Related products
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00100-2
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Number Of Nuts2
- Dust Boot IncludedYes
- Bolts IncludedNo
- Lock Nuts IncludedYes
- Bushings IncludedNo
- GreaseableYes
- Sleeves IncludedNo
- Pre-GreasedYes
- Grease Fittings IncludedNo
- Washers IncludedNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00067-12
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialSintered Metal
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.75
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400012-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
Reviews
There are no reviews yet.