BOXI (Set of 6) Front & Rear Stabilizer Sway Bar End Links + Outer Tie Rods Fit for Acura MDX 2001 2002 2003 2004 2005 / for Honda Pilot 2003 2004 2005 | Replace K90349 K90716 K90717 ES3717 ES3716
BOXI SKU#: BXM600120068-6
$44.99
BOXI 6-piece front and rear stabilizer sway bar end links and outer tie rods set for Acura MDX 2001-2005 and Honda Pilot 2003-2005. Replaces K90349, K90716, K90717, ES3717, ES3716. Verify fitment before ordering.
35 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2x Front Stabilizer / Sway Bar End Links – K90349
1x Rear Left Stabilizer / Sway Bar End Link – K90716
1x Rear Right Stabilizer / Sway Bar End Link – K90717
1x Front Driver Side Outer Tie Rod End – ES3717
1x Front Passenger Side Outer Tie Rod End – ES3716
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Acura MDX 2001 – 2005
Fit for Honda Pilot 2003 – 2005
Replacement OEM ( Original Equipment Part) Number: K90349 K90716 K90717 ES3717 ES3716
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Stabilizer / Sway Bar End Links – K90349
1x Rear Left Stabilizer / Sway Bar End Link – K90716
1x Rear Right Stabilizer / Sway Bar End Link – K90717
1x Front Driver Side Outer Tie Rod End – ES3717
1x Front Passenger Side Outer Tie Rod End – ES3716
| Weight | 6.93 lbs |
|---|---|
| Dimensions | 14.1 × 5.11 × 3.14 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2001 – 2006 | Acura | MDX | Base Touring | V6 – 3.5L 3471cc GAS MFI type J35A3 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A5 – 4 valve SOHC | ||||
| 2003 – 2008 | Honda | Pilot | EX LX | V6 – 3.5L 3471cc GAS MFI type J35A6 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | ||||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC | ||||
| V6 – 3.5L 3475cc GAS MFI type J35A4 – 4 valve SOHC | ||||
| 2006 – 2008 | Honda | Pilot | EX-L | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC | ||||
| 2008 | Honda | Pilot | SE-L | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC |
| Special Edition Value Package | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | |||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC |
Related products
-
Warranty: Two Year
- SKUBX02400005-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedNo
- Adjusting Sleeve IncludedNo
- Grease Fitting IncludedNo
- Rod End Thread GenderMale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00060-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodBolt-On
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00038-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.