BOXI 2pcs Front Outer Tie Rod Ends Fit for Ford Probe 1993-1997/MX-6 1993-1997 / for Mazda 626 1993-2002/MPV 2000-2006/Protege 1999-2003/Protege5 2002-2003 | ES3197
BOXI SKU#: BXM600110141-2
$19.99
BOXI front outer tie rod ends (2 pcs) for Ford Probe 1993-1997, Mazda 626 1993-2002, MPV, Protege. Replaces OE ES3197. Verify fitment before ordering.
31 in stock
Placement on Vehicle: Front, Left, Right
Package Included: 2x Front Outer Tie Rod Ends – ES3197
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Ford Probe 1993-1997 All Models
Replacement for Ford MX-6 1993-1997 All Models
Replacement for Mazda 626 1993-2002 All Models
Replacement for Mazda MPV 2000-2006 All Models
Replacement for Mazda Protege 1999-2003 All Models
Replacement for Mazda Protege5 2002-2003 All Models
Replacement OEM ( Original Equipment Part) Number: ES3197
Placement on Vehicle: Front, Left, Right
Package Included: 2x Front Outer Tie Rod Ends – ES3197
| Weight | 1.87 lbs |
|---|---|
| Dimensions | 6.49 × 3.74 × 1.96 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1993 – 1997 | Ford | Probe | Base | L4 – 2.0L 1989cc 122ci GAS MFI vin A – 4 valve DOHC |
| GT | V6 – 2.5L 2497cc GAS MFI vin B – 4 valve DOHC | |||
| 1997 | Ford | Probe | GTS | L4 – 2.0L 1989cc 122ci GAS MFI vin A – 4 valve DOHC |
| 1993 – 1996 | Ford | Probe | SE | L4 – 2.0L 1989cc 122ci GAS MFI vin A – 4 valve DOHC |
| 1993 – 1998 | Mazda | 626 | DX | L4 – 2.0L 1991cc GAS MFI – 4 valve DOHC |
| 1993 – 2002 | Mazda | 626 | ES LX | L4 – 2.0L 1991cc GAS MFI – 4 valve DOHC |
| V6 – 2.5L 2497cc GAS MFI – 4 valve DOHC | ||||
| 2000 – 2001 | Mazda | MPV | DX | V6 – 2.5L 2450cc 155ci GAS MFI – 4 valve DOHC |
| 2000 – 2006 | Mazda | MPV | ES LX | V6 – 2.5L 2450cc 155ci GAS MFI – 4 valve DOHC |
| V6 – 3.0L 2968cc 181ci GAS MFI type AJ – 4 valve DOHC | ||||
| 2006 | Mazda | MPV | LX-SV | V6 – 3.0L 2968cc 181ci GAS MFI type AJ – 4 valve DOHC |
| 1993 – 1997 | Mazda | MX-6 | Base | L4 – 2.0L 1991cc GAS MFI – 4 valve DOHC |
| LS | V6 – 2.5L 2497cc GAS MFI – 4 valve DOHC | |||
| 1996 | Mazda | MX-6 | M Edition | V6 – 2.5L 2497cc GAS MFI – 4 valve DOHC |
| 1999 – 2003 | Mazda | Protege | DX LX | L4 – 1.6L 1589cc GAS MFI – 4 valve DOHC |
| L4 – 2.0L 2000cc GAS MFI – 4 valve DOHC | ||||
| ES | L4 – 1.8L 1839cc GAS MFI – 4 valve DOHC | |||
| L4 – 2.0L 2000cc GAS MFI – 4 valve DOHC | ||||
| 2001 | Mazda | Protege | MP3 | L4 – 2.0L 2000cc GAS MFI – 4 valve DOHC |
| 2003 | Mazda | Protege | Mazdaspeed | L4 – 2.0L 1998cc 122ci GAS MFI Turbocharged – 4 valve DOHC |
| 2002 – 2003 | Mazda | Protege | SE | L4 – 1.6L 1589cc GAS MFI – 4 valve DOHC |
| 2002 – 2003 | Mazda | Protege5 | Base | L4 – 2.0L 2000cc GAS MFI – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00057-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh-Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread Size3/4-16 Inch
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00031-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialSintered Metal
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00038-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00041-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeTapered
- Attachment MethodBolt-On
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedYes
- Warranty TermsTwo Year
Reviews
There are no reviews yet.