BOXI (Set of 10) Front Rear Sway Bar Links + Inner Outer Tie Rods + Lower Ball Joints Fit for Mazda 626 MX-6 for Ford Probe 1993 1994 1995 1996 1997 | Replace K9615 ES3197 EV295 K90108 K90109 K80243
BOXI SKU#: BXM600110060-10
$49.99
BOXI suspension set including sway bar links, tie rods, and ball joints for Mazda 626, MX-6, Ford Probe 1993-1997. Replaces OE numbers K9615 ES3197 EV295 K90108 K90109 K80243. Verify fitment before ordering.
24 in stock
Placement on Vehicle:Front, Rear, Left, Right
Package Included:
2x – Front Lower Ball Joints – K9615
2x – Outer Tie Rod – ES3197
2x – Inner Tie Rod – EV295
1x – Front Driver Side Sway Bar – K90108
1x – Front Passenger Side Sway Bar – K90109
2x – Rear Driver & Passenger Sway Bar Link – K80243
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Mazda 626 1993 – 1995
Fit for Mazda MX-6 1993 – 1997
Fit for Ford Probe 1993 – 1997
Replacement OEM ( Original Equipment Part) Number: K9615 ES3197 EV295 K90108 K90109 K80243
Placement on Vehicle: Front, Rear, Left, Right
Package Included:
2x – Front Lower Ball Joints – K9615
2x – Outer Tie Rod – ES3197
2x – Inner Tie Rod – EV295
1x – Front Driver Side Sway Bar – K90108
1x – Front Passenger Side Sway Bar – K90109
2x – Rear Driver & Passenger Sway Bar Link – K80243
| Weight | 8.6 lbs |
|---|---|
| Dimensions | 13.78 × 4.92 × 3.54 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1993 – 1997 | Ford | Probe | Base | L4 – 2.0L 1989cc 122ci GAS MFI vin A – 4 valve DOHC |
| GT | V6 – 2.5L 2497cc GAS MFI vin B – 4 valve DOHC | |||
| 1997 | Ford | Probe | GTS | L4 – 2.0L 1989cc 122ci GAS MFI vin A – 4 valve DOHC |
| 1993 – 1996 | Ford | Probe | SE | L4 – 2.0L 1989cc 122ci GAS MFI vin A – 4 valve DOHC |
| 1996 – 1998 | Mazda | 626 | DX | L4 – 2.0L 1991cc GAS MFI – 4 valve DOHC |
| 1996 – 2002 | Mazda | 626 | ES LX | L4 – 2.0L 1991cc GAS MFI – 4 valve DOHC |
| V6 – 2.5L 2497cc GAS MFI – 4 valve DOHC | ||||
| 1996 – 1997 | Mazda | MX-6 | Base | L4 – 2.0L 1991cc GAS MFI – 4 valve DOHC |
| LS | V6 – 2.5L 2497cc GAS MFI – 4 valve DOHC | |||
| 1996 | Mazda | MX-6 | M Edition | V6 – 2.5L 2497cc GAS MFI – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBX02400005-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedNo
- Adjusting Sleeve IncludedNo
- Grease Fitting IncludedNo
- Rod End Thread GenderMale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00060-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodBolt-On
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00053-4
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Ball Stud Bearing MaterialSintered Metal
- Ball Stud TypeThreaded
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Pre-GreasedYes
- Adjusting Sleeve IncludedNo
- Lock Nut IncludedNo
- Lock Washer IncludedNo
- Dust Boot IncludedNo
- Grease Fitting IncludedYes
- GreaseableYes
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Washers IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400013-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
Reviews
There are no reviews yet.