BOXI (Set of 4) Front Inner Outer Tie Rods Fit for Chevrolet Venture 1997-2005 | for Oldsmobile Silhouette 1997-2004 | for Pontiac Montana 1999-2005 | for Pontiac Trans Sport 1997-1999 | EV260 ES3453
BOXI SKU#: BXM600070090-4
$32.99
BOXI Front Inner & Outer Tie Rod Set for Chevrolet Venture (1997-2005), Oldsmobile Silhouette (1997-2004), Pontiac Montana (1999-2005). Replaces OE numbers EV260 and ES3453. Verify fitment before ordering.
32 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2x Front Inner Tie Rod – EV260
2x Front Outer Tie Rod – ES3453
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Chevrolet Venture 1997-2005
Fit for Oldsmobile Silhouette 1997-2004
Fit for Pontiac Montana 1999-2005
Fit for Pontiac Trans Sport 1997-1999
Replacement OEM ( Original Equipment Part) Number:EV260 ES3453
Placement on Vehicle:Front, Left, Right
Kit Includes:
2x Front Inner Tie Rod – EV260
2x Front Outer Tie Rod – ES3453
| Weight | 5.39 lbs |
|---|---|
| Dimensions | 15.7 × 3.54 × 2.36 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1997 – 2004 | Chevrolet | Venture | Base | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 1997 – 2005 | Chevrolet | Venture | LS | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 2000 – 2005 | Chevrolet | Venture | LT Plus | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 2000 – 2003 | Chevrolet | Venture | Value Warner Bros. | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 1997 | Oldsmobile | Silhouette | Base | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 1997 – 2004 | Oldsmobile | Silhouette | GL GLS | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 1998 – 1999 | Oldsmobile | Silhouette | GS | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 1998 – 2004 | Oldsmobile | Silhouette | Premiere | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 1999 – 2005 | Pontiac | Montana | Base | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 1997 – 1999 | Pontiac | Trans Sport | Base | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
| 1998 | Pontiac | Trans Sport | Montana | V6 – 3.4L 207ci GAS MFI vin E type LA1 – 2 valve OHV |
Related products
-
Warranty: Two Year
- SKUBXM00076-7
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialChloroprene Rubber (CR)
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rack End Thread GenderMale
- Rod End Thread GenderFemale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- GreaseableYes
- Grease Fitting IncludedNo
- Pre-GreasedYes
- Lock Washer IncludedNo
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Lock Nut Included:Yes
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00050-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypePinch
- Attachment MethodPress-In
- Ball Stud Thread SizeM10-1.50
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedNo
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedNo
- Washer IncludedNo
- Cotter Pin IncludedNo
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00060-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodBolt-On
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400002-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderFemale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedYes
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedYes
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedNo
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
![BOXI 7pc Front Tie Rods + Idler & Pitman Arms [4-Groove] Fit for Cadillac Escalade for Chevy Silverado Avalanche](https://assets.tetronauto.com/uploads/2024/12/BXM00076-7-1-300x300.jpg)
Reviews
There are no reviews yet.