BOXI 6pcs Front Suspension Kit Outer Inner Tie Rod End Lower Ball Joint Fit 1998-2002 For Chevy Prizm 1996-2002 For Toyota Corolla 1996-1997 For Geo Prizm | K9756 ES2382 EV303
BOXI SKU#: BXM600070017-6
$50.45
BOXI 6-piece front suspension kit with outer/inner tie rod ends and lower ball joints. Fits 1996-2002 Toyota Corolla, 1998-2002 Chevy Prizm, and 1996-1997 Geo Prizm. OE numbers K9756, ES2382, EV303. Verify fitment before ordering.
63 in stock
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Lower Driver and Passenger Sides Ball Joint – K9756
2x Outer Tie Rod – ES2382
2x Inner Tie Rod – EV303
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Chevrolet Prizm 1998-2002 (All Models w/hydraulic rack)
Fit for Geo Prizm 1996-1997 (All Models w/hydraulic rack)
Fit for Toyota Corolla 1996-2002
Replacement OEM ( Original Equipment Part) Number: K9756 ES2382 EV303
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Lower Driver and Passenger Sides Ball Joint – K9756
2x Outer Tie Rod – ES2382
2x Inner Tie Rod – EV303
| Weight | 7.72 lbs |
|---|---|
| Dimensions | 14.17 × 4.92 × 4.53 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1998 – 2002 | Chevrolet | Prizm | Base LSi | L4 – 1.8L 1794cc GAS MFI vin 8 type 1ZZ-FE – 4 valve DOHC |
| 1993 – 1997 | Geo | Prizm | Base | L4 – 1.6L 1588cc 98ci GAS MFI vin 6 – 4 valve DOHC |
| LSi | L4 – 1.6L 1588cc 98ci GAS MFI vin 6 – 4 valve DOHC | |||
| L4 – 1.8L 1762cc 107ci GAS MFI vin 8 – 4 valve DOHC | ||||
| 1993 | Toyota | Corolla | All Trac | L4 – 1.6L 1587cc GAS MFI vin A type 4A-FE – 4 valve DOHC |
| 1993 – 1997 | Toyota | Corolla | Base | L4 – 1.6L 1587cc GAS MFI vin A type 4A-FE – 4 valve DOHC |
| L4 – 1.8L 1762cc 107ci GAS MFI vin A type 7A-FE – 4 valve DOHC | ||||
| DX | L4 – 1.8L 1762cc 107ci GAS MFI vin A type 7A-FE – 4 valve DOHC | |||
| L4 – 1.8L 1762cc 107ci GAS MFI vin B type 7A-FE – 4 valve DOHC | ||||
| 1997 – 2002 | Toyota | Corolla | CE | L4 – 1.6L 1587cc GAS MFI vin A type 4A-FE – 4 valve DOHC |
| L4 – 1.8L 1762cc 107ci GAS MFI vin B type 7A-FE – 4 valve DOHC | ||||
| L4 – 1.8L 1794cc GAS MFI vin R type 1ZZ-FE – 4 valve DOHC | ||||
| 1993 – 2002 | Toyota | Corolla | LE | L4 – 1.8L 1762cc 107ci GAS MFI vin A type 7A-FE – 4 valve DOHC |
| L4 – 1.8L 1762cc 107ci GAS MFI vin B type 7A-FE – 4 valve DOHC | ||||
| L4 – 1.8L 1794cc GAS MFI vin R type 1ZZ-FE – 4 valve DOHC | ||||
| 2001 – 2002 | Toyota | Corolla | S | L4 – 1.8L 1794cc GAS MFI vin R type 1ZZ-FE – 4 valve DOHC |
| 1998 – 2000 | Toyota | Corolla | VE | L4 – 1.8L 1794cc GAS MFI vin R type 1ZZ-FE – 4 valve DOHC |
| 1996 – 2003 | Toyota | RAV4 | Base | BATTERY EV vin S |
| L4 – 2.0L 1998cc 122ci GAS MFI type 3S-FE – 4 valve DOHC | ||||
| L4 – 2.0L 1998cc 122ci GAS MFI vin P type 3S-FE – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBX02400002-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderFemale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedYes
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedYes
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedNo
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00063-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.25
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00004-13
- Warranty TermsTwo Year
Reviews
There are no reviews yet.