BOXI 10pcs Front and Rear Sway Bar Links & Lower Ball Joints & Tie Rods for Acura MDX 2001 2002 2003 2004 2005 / for Honda Pilot 2003 2004 2005 | K80281 K90349 K90716 K90717 ES3717 ES3716 EV471
BOXI SKU#: BXM00229-10
$65.99
BOXI sway bar links, ball joints, and tie rod ends kit for Acura MDX 2001-2005 and Honda Pilot 2003-2005. Replaces OEM K80281, K90349, K90716, K90717, ES3717, ES3716, EV471. Verify fitment before ordering.
63 in stock
Placement on Vehicle: Front, Left, Lower, Rear, Right
Package Included:
2x Front Sway Bar End Link – K90349
1x Rear Left Sway Bar End Link – K90716
1x Rear Right Sway Bar End Link – K90717
2x Front Lower Ball Joint – K80281
1x Front Left Outer Tie Rod End – ES3717
1x Front Right Outer Tie Rod End – ES3716
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Acura MDX 2001-2005 All Models
Replacement for Honda Pilot 2003-2005 All Models
Replacement OEM ( Original Equipment Part) Number: K80281 K90349 K90716 K90717 ES3717 ES3716 EV471
Package Included:
2 * Front Sway Bar End Link – K90349
1 * Rear Left Sway Bar End Link – K90716
1 * Rear Right Sway Bar End Link – K90717
2 * Front Lower Ball Joint – K80281
1 * Front Left Outer Tie Rod End – ES3717
1 * Front Right Outer Tie Rod End – ES3716
2 * Inner Tie Rod End – EV471
Placement on Vehicle: Front, Left, Lower, Rear, Right
| Weight | 11.18 lbs |
|---|---|
| Dimensions | 15.12 × 5.12 × 4.09 in |
| Brand | BOXI |
| Condition | New |
| Number Of Nuts | 2 |
| Ball Stud Type | Threaded |
| Ball Stud Housing Material | Steel |
| Ball Stud Bearing Material | Polymer |
| Cotter Pin Included | No |
| Bolts Included | No |
| Bushings Included | No |
| Sleeves Included | No |
| Dust Boot Included | Yes |
| Grease Fittings Included | No |
| Greaseable | Yes |
| Washers Included | No |
| Pre-Greased | Yes |
| Castle Nut Included | No |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2001 – 2006 | Acura | MDX | Base Touring | V6 – 3.5L 3471cc GAS MFI type J35A3 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A5 – 4 valve SOHC | ||||
| 2003 – 2008 | Honda | Pilot | EX LX | V6 – 3.5L 3471cc GAS MFI type J35A6 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | ||||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC | ||||
| V6 – 3.5L 3475cc GAS MFI type J35A4 – 4 valve SOHC | ||||
| 2006 – 2008 | Honda | Pilot | EX-L | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC |
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC | ||||
| 2008 | Honda | Pilot | SE-L | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC |
| Special Edition Value Package | V6 – 3.5L 3471cc GAS MFI type J35A9 – 4 valve SOHC | |||
| V6 – 3.5L 3471cc GAS MFI type J35Z1 – 4 valve SOHC |
Related products
-
Warranty: Two Year
- SKUBXM00067-12
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialSintered Metal
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.75
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400012-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
Reviews
There are no reviews yet.