BOXI 2pcs Front Inner Tie Rod Ends Fit for Toyota Sienna 2004 2005 2006 2007 2008 2009 2010 Passenger Van 3.3L 3.5L | EV80893
BOXI SKU#: BXM600330069-2
$23.82
BOXI front inner tie rod ends for 2004-2010 Toyota Sienna vans. Replaces OE number EV80893. Verify fitment before ordering.
148 in stock
Placement on Vehicle:Front, Left, Right
Package Included:2x Front Inner Tie Rod Ends – EV80893
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Toyota Sienna 2004-2010 All Models
Replacement OEM ( Original Equipment Part) Number: EV80893
Placement on Vehicle: Front, Left, Right
Package Included: 2x Front Inner Tie Rod Ends – EV80893
| Weight | 2.71 lbs |
|---|---|
| Dimensions | 12.95 × 2.52 × 2.13 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2003 – 2010 | Toyota | Sienna | CE LE XLE | V6 – 3.0L 2995cc GAS MFI type 1MZ-FE – 4 valve DOHC |
| V6 – 3.3L 3300cc 202ci GAS MFI type 3MZ-FE – 4 valve DOHC | ||||
| V6 – 3.5L 3456cc GAS MFI type 2GRFE – 4 valve DOHC | ||||
| 2006 – 2010 | Toyota | Sienna | Limited | V6 – 3.3L 3300cc 202ci GAS MFI type 3MZ-FE – 4 valve DOHC |
| V6 – 3.5L 3456cc GAS MFI type 2GRFE – 4 valve DOHC | ||||
| 2003 – 2005 | Toyota | Sienna | XLE Limited | V6 – 3.0L 2995cc GAS MFI type 1MZ-FE – 4 valve DOHC |
| V6 – 3.3L 3300cc 202ci GAS MFI type 3MZ-FE – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00063-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.25
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400002-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderFemale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedYes
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedYes
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedNo
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00076-7
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialChloroprene Rubber (CR)
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rack End Thread GenderMale
- Rod End Thread GenderFemale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- GreaseableYes
- Grease Fitting IncludedNo
- Pre-GreasedYes
- Lock Washer IncludedNo
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Lock Nut Included:Yes
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00050-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypePinch
- Attachment MethodPress-In
- Ball Stud Thread SizeM10-1.50
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedNo
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedNo
- Washer IncludedNo
- Cotter Pin IncludedNo
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
![BOXI 7pc Front Tie Rods + Idler & Pitman Arms [4-Groove] Fit for Cadillac Escalade for Chevy Silverado Avalanche](https://assets.tetronauto.com/uploads/2024/12/BXM00076-7-1-300x300.jpg)
Reviews
There are no reviews yet.