BOXI (Set of 6) Front Inner & Outer Tie Rod End Links + Front Stabilizer Sway Bar End Links Suspension Kit Fit for Suzuki SX4 2007 2008 2009 2010 2011 2012 2013 | Replace ES800363 EV800714 K750060
BOXI SKU#: BXM600320002-6
$55.89
BOXI Front inner and outer tie rod ends and sway bar end links for Suzuki SX4 (2007-2013). Replaces OE numbers ES800363, EV800714, K750060. Verify fitment before ordering.
30 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2x Front Outer Tie Rod End Link – ES800363
2x Front Inner Tie Rod End Link – EV800714
2x Front Sway Bar End Link – K750060
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Suzuki SX4 2007 – 2013
Replacement OEM (Original Equipment Part) Number: ES800363 EV800714 K750060
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Outer Tie Rod End Link – ES800363
2x Front Inner Tie Rod End Link – EV800714
2x Front Sway Bar End Link – K750060
| Weight | 5.61 lbs |
|---|---|
| Dimensions | 14.5 × 4.33 × 2.36 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2007 – 2013 | Suzuki | SX4 | Base | L4 – 2.0L 1997cc 122ci GAS MFI – 4 valve DOHC |
| L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC | ||||
| L4 – 2.0L 1997cc 122ci GAS MPI type J20A – 4 valve DOHC | ||||
| Sport | L4 – 2.0L 1997cc 122ci GAS MFI – 4 valve DOHC | |||
| L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC | ||||
| 2010 – 2013 | Suzuki | SX4 | Crossover LE Sport SE Sportback | L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC |
| 2011 – 2013 | Suzuki | SX4 | JA | L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC |
| 2012 – 2013 | Suzuki | SX4 | JE | L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC |
| 2008 – 2011 | Suzuki | SX4 | JLX | L4 – 2.0L 1997cc 122ci GAS MFI – 4 valve DOHC |
| L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC | ||||
| 2008 – 2013 | Suzuki | SX4 | JX | L4 – 2.0L 1997cc 122ci GAS MFI – 4 valve DOHC |
| L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC | ||||
| 2011 | Suzuki | SX4 | LE Anniversary Edition | L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC |
| 2010 – 2011 | Suzuki | SX4 | Sport GTS Sport S | L4 – 2.0L 1997cc 122ci GAS MFI vin 5 type J20B – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00038-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00043-10
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Pre-GreasedYes
- Adjusting Sleeve IncludedNo
- Lock Nut IncludedYes
- Lock Washer IncludedNo
- Dust Boot IncludedNo
- Grease Fitting IncludedNo
- GreaseableNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00057-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh-Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread Size3/4-16 Inch
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00060-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodBolt-On
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.