BOXI (Set of 8) Front Inner & Outer Tie Rods + Front & Rear Stabilizer Sway Bar End Link Kit Fit for Nissan Quest 2004 2005 2006 2007 2008 2009 | Replace K80257 K80255 K80256 ES800404 EV800227
BOXI SKU#: BXM600240036-8
$47.88
BOXI Front & Rear Tie Rod and Sway Bar End Link Kit for Nissan Quest 2004-2009. Includes OE replacements: K80257, K80255, K80256, ES800404, EV800227. Verify fitment before ordering.
35 in stock
Placement on Vehicle: Front, Rear, Left, Right
Package Included:
2x Rear Stabilizer / Sway Bar End Link – K80257
1x Front Stabilizer / Sway Bar End Link (Driver) – K80255
1x Front Stabilizer / Sway Bar End Link (Passenger) – K80256
2x Front Outer Tie Rod End – ES800404
2x Front Inner Tie Rod End – EV800227
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Nissan Quest 2004-2009
Replacement OEM ( Original Equipment Part) Number: K80257 K80255 K80256 ES800404 EV800227
Placement on Vehicle: Front, Rear, Left, Right
Package Included:
2x Rear Stabilizer / Sway Bar End Link – K80257
1x Front Stabilizer / Sway Bar End Link (Driver) – K80255
1x Front Stabilizer / Sway Bar End Link (Passenger) – K80256
2x Front Outer Tie Rod End – ES800404
2x Front Inner Tie Rod End – EV800227
| Weight | 9.08 lbs |
|---|---|
| Dimensions | 14.37 × 5 × 4.13 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2005 – 2009 | Nissan | Quest | Base | V6 – 3.5L 3498cc GAS MFI type VQ35DE – 4 valve DOHC |
| 2004 – 2009 | Nissan | Quest | S SE SL | V6 – 3.5L 3498cc GAS MFI type VQ35DE – 4 valve DOHC |
| 2006 | Nissan | Quest | SL Special Edition | V6 – 3.5L 3498cc GAS MFI type VQ35DE – 4 valve DOHC |
| 2009 | Nissan | Quest | SLT | V6 – 3.5L 3498cc GAS MFI type VQ35DE – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00060-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodBolt-On
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00098-4
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderFemale
- Dust Boot IncludedYes
- Grease Fitting IncludedNo
- Pre-GreasedYes
- GreaseableNo
- Lock Nut IncludedYes
- Adjusting Sleeve IncludedNo
- Lock Washer IncludedNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00100-2
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Number Of Nuts2
- Dust Boot IncludedYes
- Bolts IncludedNo
- Lock Nuts IncludedYes
- Bushings IncludedNo
- GreaseableYes
- Sleeves IncludedNo
- Pre-GreasedYes
- Grease Fittings IncludedNo
- Washers IncludedNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400005-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedNo
- Adjusting Sleeve IncludedNo
- Grease Fitting IncludedNo
- Rod End Thread GenderMale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
Reviews
There are no reviews yet.