BOXI 4pcs Front Inner Outer Tie Rod Kit Fit for Mitsubishi Outlander 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 / for Mitsubishi Lancer 2009-2017 | EV800638 ES800471
BOXI SKU#: BXM600230005-4
$51.99
BOXI front inner and outer tie rod end kit for Mitsubishi Outlander 2007-2017 and Lancer 2009-2017. Replaces OE numbers EV800638 and ES800471. Verify fitment before ordering.
106 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2 x Front Inner Tie Rod Ends – EV800638
2 x Front Outer Tie Rod Ends – ES800471
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Mitsubishi Outlander 2007-2017 All Models
Replacement for Mitsubishi Lancer 2009-2017 All Models
Replacement OEM ( Original Equipment Part) Number: EV800638 ES800471
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Inner Tie Rod Ends – EV800638
2x Front Outer Tie Rod Ends – ES800471
| Weight | 4.19 lbs |
|---|---|
| Dimensions | 15.35 × 8.31 × 2.28 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2014 | Mitsubishi | Lancer | Evolution | L4 – 2.0L 1998cc 122ci GAS MFI Turbocharged vin V type 4B11 – 4 valve DOHC |
| Limited Edition | L4 – 2.0L 1998cc 122ci GAS MFI vin U type 4B11 – 4 valve DOHC | |||
| 2008 – 2014 | Mitsubishi | Lancer | Evolution GSR Evolution MR | L4 – 2.0L 1998cc 122ci GAS MFI Turbocharged vin V type 4B11 – 4 valve DOHC |
| 2010 – 2011 | Mitsubishi | Lancer | Evolution MR Touring Ralliart Sportback | L4 – 2.0L 1998cc 122ci GAS MFI Turbocharged vin V type 4B11 – 4 valve DOHC |
| 2009 | Mitsubishi | Lancer | Evolution RS | L4 – 2.0L 1998cc 122ci GAS MFI Turbocharged vin V type 4B11 – 4 valve DOHC |
| 2010 | Mitsubishi | Lancer | Evolution SE | L4 – 2.0L 1998cc 122ci GAS MFI Turbocharged vin V type 4B11 – 4 valve DOHC |
| 2013 – 2014 | Mitsubishi | Lancer | GT | L4 – 2.0L 1998cc 122ci GAS MFI vin U type 4B11 – 4 valve DOHC |
| L4 – 2.4L 2360cc 144ci GAS MFI vin W type 4B12 – 4 valve DOHC | ||||
| 2009 – 2014 | Mitsubishi | Lancer | Ralliart | L4 – 2.0L 1998cc 122ci GAS MFI Turbocharged vin V type 4B11 – 4 valve DOHC |
| 2012 – 2014 | Mitsubishi | Lancer | SE | L4 – 2.0L 1998cc 122ci GAS MFI vin U type 4B11 – 4 valve DOHC |
| L4 – 2.4L 2360cc 144ci GAS MFI vin W type 4B12 – 4 valve DOHC | ||||
| 2008 | Mitsubishi | Outlander | Base | L4 – 2.4L 2351cc GAS MPI type 4G69 – 4 valve SOHC |
| 2007 – 2013 | Mitsubishi | Outlander | ES | L4 – 2.4L 2360cc 144ci GAS MFI vin W type 4B12 – 4 valve DOHC |
| V6 – 3.0L 2998cc 182ci GAS MFI vin X type 6B31 – 4 valve SOHC | ||||
| LS XLS | L4 – 2.4L 2351cc GAS MPI type 4B12 – 4 valve DOHC | |||
| L4 – 2.4L 2360cc 144ci GAS MFI vin W type 4B12 – 4 valve DOHC | ||||
| V6 – 3.0L 2998cc 182ci GAS MFI vin X type 6B31 – 4 valve SOHC | ||||
| 2010 – 2013 | Mitsubishi | Outlander | GT Limited | V6 – 3.0L 2998cc 182ci GAS MFI vin X type 6B31 – 4 valve SOHC |
| 2008 – 2013 | Mitsubishi | Outlander | SE | L4 – 2.4L 2360cc 144ci GAS MFI vin W type 4B12 – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00067-12
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialSintered Metal
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.75
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00093-4
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Pre-GreasedYes
- Grease Fitting IncludedNo
- Castle Nut IncludedYes
- GreaseableNo
- Cotter Pin IncludedYes
- Lock Nut IncludedNo
- Lock Washer IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.