BOXI (Set of 4) Front Inner & Outer Tie Rod Ends Kit Fit for Hyundai Entourage 2007 2008 2009 / for Kia Sedona 2006 2007 2008 2009 2010 2011 2012 2014 | Replace EV800299 ES800371 ES800372
BOXI SKU#: BXM600170010-4
$44.99
BOXI Front Inner & Outer Tie Rod Ends Kit compatible with Hyundai Entourage 2007-2009 and Kia Sedona 2006-2012, 2014. Replaces OE numbers EV800299, ES800371, ES800372. Verify fitment before ordering.
2 in stock
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Driver and Passenger Side Inner Tie Rod Ends – EV800299
1x Front Outer Tie Rod End Driver Side – ES800371
1x Front Outer Tie Rod End Passenger Side – ES800372
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Hyundai Entourage 2007 – 2009
Fit for Kia Sedona 2006 – 2012
Fit for Kia Sedona 2014
Replacement OEM (Original Equipment Part) Number: EV800299 ES800371 ES800372
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Driver and Passenger Side Inner Tie Rod Ends – EV800299
1x Front Outer Tie Rod End Driver Side – ES800371
1x Front Outer Tie Rod End Passenger Side – ES800372
| Weight | 5.72 lbs |
|---|---|
| Dimensions | 10.2 × 3.93 × 2.75 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2008 | Hyundai | Entourage | GL | V6 – 3.8L 3778cc 231ci GAS MFI vin 3 – 4 valve DOHC |
| 2007 – 2008 | Hyundai | Entourage | GLS Limited | V6 – 3.8L 3778cc 231ci GAS MFI vin 3 – 4 valve DOHC |
| 2008 – 2009 | Hyundai | Entourage | L | V6 – 3.8L 3778cc 231ci GAS MFI vin 3 – 4 valve DOHC |
| 2007 | Hyundai | Entourage | SE | V6 – 3.8L 3778cc 231ci GAS MFI vin 3 – 4 valve DOHC |
| 2007 – 2010 | Kia | Sedona | Base | V6 – 3.8L 3778cc 231ci GAS MFI vin 3 – 4 valve DOHC |
| 2006 – 2014 | Kia | Sedona | EX LX | V6 – 3.5L 3470cc GAS MFI vin 7 – 4 valve DOHC |
| V6 – 3.8L 3778cc 231ci GAS MFI – 4 valve DOHC | ||||
| V6 – 3.8L 3778cc 231ci GAS MFI vin 3 – 4 valve DOHC | ||||
| 2008 – 2014 | Kia | Sedona | EX Luxury | V6 – 3.5L 3470cc GAS MFI vin 7 – 4 valve DOHC |
| V6 – 3.8L 3778cc 231ci GAS MFI vin 3 – 4 valve DOHC | ||||
| 2008 | Kia | Sedona | EX Power | V6 – 3.8L 3778cc 231ci GAS MFI vin 3 – 4 valve DOHC |
| 2014 | Kia | Sedona | LX Convenience | V6 – 3.5L 3470cc GAS MFI vin 7 – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBX02400013-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00050-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypePinch
- Attachment MethodPress-In
- Ball Stud Thread SizeM10-1.50
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedNo
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedNo
- Washer IncludedNo
- Cotter Pin IncludedNo
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00041-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeTapered
- Attachment MethodBolt-On
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size17mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedYes
- Warranty TermsTwo Year
Reviews
There are no reviews yet.