BOXI 2pcs Front Outer Tie Rod Ends Fit for Honda Civic 2001 2002 2003 2004 2005 / for Honda CR-V 2002 2003 2004 2005 2006 / for Acura EL 2001 2002 2003 2004 2005 | ES3581
BOXI SKU#: BXM600120026-2
$37.58
BOXI Front Outer Tie Rod Ends (ES3581) for Honda Civic 2001-2005, CR-V 2002-2006, and Acura EL 2001-2005. Verify fitment before ordering.
88 in stock
Placement on Vehicle: Front, Left, Right
Package Included: 2x Front Outer Tie Rod Ends (Driver & Passenger) – ES3581
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Honda Civic 2001-2005 All Models
Replacement for Honda CR-V 2002-2006 All Models
Replacement for Acura EL 2001-2005 All Models
Replacement OEM ( Original Equipment Part) Number: ES3581
Placement on Vehicle: Front, Left, Right
Package Included: 2x Front Outer Tie Rod Ends (Driver & Passenger) – ES3581
| Weight | 1.34 lbs |
|---|---|
| Dimensions | 6.38 × 3.74 × 2.05 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2001 – 2005 | Acura | EL | Base | L4 – 1.7L 1668cc GAS MFI type D17A2 – 4 valve SOHC |
| 2002 – 2003 | Honda | CR-V | Base | L4 – 2.4L 2354cc 144ci GAS MFI type K24A1 – 4 valve DOHC |
| 2002 – 2006 | Honda | CR-V | EX LX | L4 – 2.4L 2354cc 144ci GAS MFI type K24A1 – 4 valve DOHC |
| 2005 – 2006 | Honda | CR-V | EX-L SE | L4 – 2.4L 2354cc 144ci GAS MFI type K24A1 – 4 valve DOHC |
| 2001 – 2005 | Honda | Civic | DX LX | L4 – 1.7L 1668cc GAS MFI type D17A1 – 4 valve SOHC |
| L4 – 1.7L 1700cc GAS MFI type D17A1 – 4 valve SOHC | ||||
| EX | L4 – 1.7L 1668cc GAS MFI type D17A2 – 4 valve SOHC | |||
| L4 – 1.7L 1700cc GAS MFI type D17A2 – 4 valve SOHC | ||||
| GX | L4 – 1.7L 1668cc CNG MFI type D17A7 – 4 valve SOHC | |||
| L4 – 1.7L 1700cc CNG MFI type D17A7 – 4 valve SOHC | ||||
| HX | L4 – 1.7L 1668cc GAS MFI type D17A6 – 4 valve SOHC | |||
| L4 – 1.7L 1700cc GAS MFI type D17A6 – 4 valve SOHC | ||||
| 2005 | Honda | Civic | EX Special Edition | L4 – 1.7L 1668cc GAS MFI type D17A2 – 4 valve SOHC |
| LX Special Edition | L4 – 1.7L 1668cc GAS MFI type D17A1 – 4 valve SOHC | |||
| Reverb | L4 – 1.7L 1668cc GAS MFI type D17A1 – 4 valve SOHC | |||
| L4 – 1.7L 1668cc GAS MFI type D17A2 – 4 valve SOHC | ||||
| 2003 – 2005 | Honda | Civic | Hybrid | L4 – 1.3L 1339cc FULL HYBRID EV-GAS MFI type LDA1 – 2 valve SOHC |
| 2002 – 2005 | Honda | Civic | SI | L4 – 1.7L 1668cc GAS MFI type D17A2 – 4 valve SOHC |
| L4 – 1.7L 1700cc GAS MFI type D17A2 – 4 valve SOHC | ||||
| L4 – 2.0L 1998cc 122ci GAS MFI type K20A3 – 4 valve DOHC | ||||
| 2002 – 2004 | Honda | Civic | SiR | L4 – 2.0L 1998cc 122ci GAS MFI type K20A3 – 4 valve DOHC |
| 2004 – 2005 | Honda | Civic | Value Package | L4 – 1.7L 1668cc GAS MFI type D17A1 – 4 valve SOHC |
| L4 – 1.7L 1700cc GAS MFI type D17A1 – 4 valve SOHC |
Related products
-
Warranty: Two Year
- SKUBXM00093-4
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Pre-GreasedYes
- Grease Fitting IncludedNo
- Castle Nut IncludedYes
- GreaseableNo
- Cotter Pin IncludedYes
- Lock Nut IncludedNo
- Lock Washer IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400002-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderFemale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedYes
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedYes
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedNo
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00004-13
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00057-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh-Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread Size3/4-16 Inch
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.