BOXI 4pcs Front Inner Outer Tie Rod Ends Fit for Ford Windstar 1995 1996 1997 1998 1999 2000 2001 2002 2003 Van 3.0L 3.8L | ES3181 EV315
BOXI SKU#: BXM600110071-4
$28.99
BOXI front inner and outer tie rod ends fit 1995-2003 Ford Windstar. Replaces OEM numbers ES3181 and EV315. Verify fitment before ordering.
4 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2x Front Outer Tie Rod Ends – ES3181
2x Front Inner Tie Rod Ends – EV315
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Ford Windstar 1995-2003
Replacement OEM ( Original Equipment Part) Number: ES3181 EV315
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Outer Tie Rod Ends – ES3181
2x Front Inner Tie Rod Ends – EV315
| Weight | 5.17 lbs |
|---|---|
| Dimensions | 17.1 × 2.55 × 4.13 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1998 – 1999 | Ford | Windstar | 3.0L | V6 – 3.0L 2986cc 182ci GAS MFI vin U – 2 valve OHV |
| 1995 – 2003 | Ford | Windstar | Base | V6 – 3.0L 2986cc 182ci GAS MFI vin U – 2 valve OHV |
| V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV | ||||
| LX | V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV | |||
| 1995 – 1998 | Ford | Windstar | GL | V6 – 3.0L 2986cc 182ci GAS MFI vin U – 2 valve OHV |
| V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV | ||||
| GL Plus | V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV | |||
| 1999 – 2002 | Ford | Windstar | LX Plus | V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV |
| 1998 – 2003 | Ford | Windstar | Limited | V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV |
| 1999 – 2003 | Ford | Windstar | SE SEL | V6 – 3.0L 2986cc 182ci GAS MFI vin U – 2 valve OHV |
| V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV | ||||
| 2001 – 2002 | Ford | Windstar | SE Sport | V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV |
| 2003 | Ford | Windstar | Sport | V6 – 3.8L 232ci GAS MFI vin 4 – 2 valve OHV |
Related products
-
Warranty: Two Year
- SKUBXM00106-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Ball Stud Bearing MaterialSintered Metal
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderMale
- Rack End Thread GenderFemale
- Grease Fitting IncludedYes
- Dust Boot IncludedNo
- GreaseableYes
- Adjusting Sleeve IncludedNo
- Washers IncludedYes
- Lock Washer IncludedNo
- Pre-GreasedYes
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Lock Nut IncludedYes
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00004-13
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00100-2
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Number Of Nuts2
- Dust Boot IncludedYes
- Bolts IncludedNo
- Lock Nuts IncludedYes
- Bushings IncludedNo
- GreaseableYes
- Sleeves IncludedNo
- Pre-GreasedYes
- Grease Fittings IncludedNo
- Washers IncludedNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.