BOXI 13pcs Drag Links Tie Rods Ball Joints Sway Bar End Center Kit Fit for Jeep Cherokee 1991-2001 / for Jeep Comanche 1991-1992 | DS1238 ES3094 ES3095 ES3096 DS1326 ES2079 DS1235 K3174 K3134 K3161
BOXI SKU#: BXM600160015-13
$161.99
This auto part is identified by SKU BXM600160015-13. Compatibility information is not available. Verify fitment before ordering.
88 in stock
Placement on Vehicle: Front, Left, Lower, Right, Upper
Package Included:
1x Front Passenger Side Outer – Pitman Arm to Steering Arm – DS1238
1x Front Driver Side Outer Tie Rod End – ES3094
1x Front Passenger Side Inner Tie Rod End – ES3095
1x Front Outer Tie Rod End Driver Side – ES3096
1x Steering Tie Rod End Adjusting Sleeve – DS1326
1x Front Passenger Side Tie Rod Adjusting Sleeve – ES2079
1x Front Suspension Track Bar – DS1235
2x Front Stabilizer Sway Bar End Links Driver and Passenger Side – K3174
2x Front Upper Ball Joints – K3134
2x Front Lower Ball Joints – K3161
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Jeep Cherokee 1991-2001 All Models
Replacement for Jeep Comanche 1991-1992 All Models
Replacement OEM ( Original Equipment Part) Number: DS1238 ES3094 ES3095 ES3096 DS1326 ES2079 DS1235 K3174 K3134 K3161
Placement on Vehicle: Front, Left, Lower, Right, Upper
Package Included:
1x Front Passenger Side Outer – Pitman Arm to Steering Arm – DS1238
1x Front Driver Side Outer Tie Rod End – ES3094
1x Front Passenger Side Inner Tie Rod End – ES3095
1x Front Outer Tie Rod End Driver Side – ES3096
1x Steering Tie Rod End Adjusting Sleeve – DS1326
1x Front Passenger Side Tie Rod Adjusting Sleeve – ES2079
1x Front Suspension Track Bar – DS1235
2x Front Stabilizer Sway Bar End Links Driver and Passenger Side – K3174
2x Front Upper Ball Joints – K3134
2x Front Lower Ball Joints – K3161
| Weight | 31.2 lbs |
|---|---|
| Dimensions | 39.25 × 5 × 4.5 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1991 – 1994 | Jeep | Cherokee | Base | L4 – 2.5L 150ci GAS MFI vin P – 2 valve OHV |
| L6 – 4.0L 242ci GAS MFI vin S – 2 valve OHV | ||||
| 1991 – 1992 | Jeep | Cherokee | Briarwood Laredo | L6 – 4.0L 242ci GAS MFI vin S – 2 valve OHV |
| 1996 – 2001 | Jeep | Cherokee | Classic | L6 – 4.0L 242ci GAS MFI vin S – 2 valve OHV |
| 1993 – 1997 | Jeep | Cherokee | Country | L6 – 4.0L 242ci GAS MFI vin S – 2 valve OHV |
| 1991 – 2001 | Jeep | Cherokee | Limited Sport | L6 – 4.0L 242ci GAS MFI vin S – 2 valve OHV |
| 1994 – 2001 | Jeep | Cherokee | SE | L4 – 2.5L 150ci GAS MFI vin P – 2 valve OHV |
| L6 – 4.0L 242ci GAS MFI vin S – 2 valve OHV | ||||
| 1991 – 1992 | Jeep | Comanche | Base Pioneer | L4 – 2.5L 150ci GAS MFI vin P – 2 valve OHV |
| L6 – 4.0L 242ci GAS MFI vin S – 2 valve OHV | ||||
| Eliminator | L6 – 4.0L 242ci GAS MFI vin S – 2 valve OHV |
Related products
-
Warranty: Two Year
- SKUBXM00033-4
- BrandBOXI
- ConditionNew
- Dust Boot MaterialNeoprene
- Ball Stud Thread Size3/4-16 Inch
- Attachment MethodPress-In
- Number Of Mounting Holes0
- Dust Boot IncludedYes
- Mounting Plate IncludedNo
- Grease Fitting IncludedNo
- AdjustableNo
- GreaseableYes
- Washer IncludedNo
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02401192-1
- BrandBOXI
- ConditionNew
- Unit of MeasureEach
- AdjustableNo
- Dust Boot ColorBlack
- Number Of Mounting Holes0
- Attachment MethodPress-In
- Locking Nut IncludedNo
- Dust Boot IncludedYes
- C Clips IncludedYes
- Dust Boot MaterialNeoprene
- Grease Fitting IncludedNo
- Ball Joint Bearing MaterialPolymer
- GreaseableYes
- Ball Stud Thread SizeM14-1.50
- Washer IncludedNo
- Ball Stud Nut Wrench Size19mm
- Mounting Plate IncludedNo
- Ball Stud TypeThreaded
- Pre-GreasedYes
- Ball Stud Housing MaterialHigh-Strength Steel
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00032-2
- BrandBOXI
- ConditionNew
- Dust Boot MaterialRubber
- Attachment MethodPress-In
- Number Of Mounting Holes0
- Dust Boot IncludedYes
- Mounting Plate IncludedNo
- Grease Fitting IncludedNo
- AdjustableNo
- GreaseableYes
- Washer IncludedNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00020-4
- BrandBOXI
- ConditionNew
- Dust Boot MaterialNeoprene
- Ball Stud Thread SizeM16-2.0
- Attachment MethodPress-In
- Number Of Mounting Holes0
- Dust Boot IncludedYes
- Mounting Plate IncludedNo
- Grease Fitting IncludedNo
- AdjustableNo
- GreaseableYes
- Washer IncludedNo
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Warranty TermsTwo Year
Reviews
There are no reviews yet.