BOXI 4pcs Front Inner Outer Tie Rod Ends Fit for Dodge Durango 2004-2006 / for Chrysler Aspen 2007-2009 – Sport Utility 4-Door – FIT 16mm Thread / 5-Lug Models ONLY | ES800367 EV800573
BOXI SKU#: BXM600100074-4
$47.99
BOXI 4-piece front inner and outer tie rod end set fits Dodge Durango 2004-2006, Chrysler Aspen 2007-2009. Replaces ES800367 EV800573. Verify fitment before ordering.
22 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2x Front Outer Tie Rod Ends [16mm Thread] – ES800367
2x Front Inner Tie Rod Ends – EV800573
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
**FITS 16mm Thread / 5-Lug Models ONLY**
Replacement for Dodge Durango 2004-2006
Replacement for Chrysler Aspen 2007-2009
Replacement OEM ( Original Equipment Part) Number: ES800367 EV800573
Placement on Vehicle: Front, Left, Right
Package Included:
2x Front Outer Tie Rod Ends [16mm Thread] – ES800367
2x Front Inner Tie Rod Ends – EV800573
| Weight | 6.72 lbs |
|---|---|
| Dimensions | 13.78 × 4.33 × 2.56 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2006 – 2007 | Dodge | Durango | ADVENTURER | V8 – 4.7L 287ci FLEX MFI vin P – 2 valve SOHC |
| V8 – 4.7L 287ci GAS MFI vin N – 2 valve SOHC | ||||
| V8 – 5.7L 345ci GAS MFI vin 2 type EZB – 2 valve OHV | ||||
| 2007 | Dodge | Durango | Base | V8 – 4.7L 287ci GAS MFI vin N – 2 valve SOHC |
| 2004 – 2007 | Dodge | Durango | Limited | V8 – 4.7L 287ci FLEX MFI vin P – 2 valve SOHC |
| V8 – 4.7L 287ci GAS MFI vin N – 2 valve SOHC | ||||
| V8 – 5.7L 345ci GAS MFI vin 2 type EZB – 2 valve OHV | ||||
| V8 – 5.7L 345ci GAS MFI vin D – 2 valve OHV | ||||
| SLT | V6 – 3.7L 226ci GAS MFI vin K – 2 valve SOHC | |||
| V8 – 4.7L 287ci FLEX MFI vin P – 2 valve SOHC | ||||
| V8 – 4.7L 287ci GAS MFI vin N – 2 valve SOHC | ||||
| V8 – 5.7L 345ci GAS MFI vin 2 type EZB – 2 valve OHV | ||||
| V8 – 5.7L 345ci GAS MFI vin D – 2 valve OHV | ||||
| 2004 – 2005 | Dodge | Durango | ST | V6 – 3.7L 226ci GAS MFI vin K – 2 valve SOHC |
| V8 – 4.7L 287ci GAS MFI vin N – 2 valve SOHC | ||||
| V8 – 5.7L 345ci GAS MFI vin D – 2 valve OHV | ||||
| 2005 – 2007 | Dodge | Durango | SXT | V6 – 3.7L 226ci GAS MFI vin K – 2 valve SOHC |
| V8 – 4.7L 287ci FLEX MFI vin P – 2 valve SOHC | ||||
| V8 – 4.7L 287ci GAS MFI vin N – 2 valve SOHC | ||||
| V8 – 5.7L 345ci GAS MFI vin 2 type EZB – 2 valve OHV |
Related products
-
Warranty: Two Year
- SKUBXM00063-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialRubber
- Ball Joint Bearing MaterialMetal
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread SizeM12-1.25
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00050-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypePinch
- Attachment MethodPress-In
- Ball Stud Thread SizeM10-1.50
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedNo
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedNo
- Washer IncludedNo
- Cotter Pin IncludedNo
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00076-7
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialChloroprene Rubber (CR)
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rack End Thread GenderMale
- Rod End Thread GenderFemale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- GreaseableYes
- Grease Fitting IncludedNo
- Pre-GreasedYes
- Lock Washer IncludedNo
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Lock Nut Included:Yes
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
![BOXI 7pc Front Tie Rods + Idler & Pitman Arms [4-Groove] Fit for Cadillac Escalade for Chevy Silverado Avalanche](https://assets.tetronauto.com/uploads/2024/12/BXM00076-7-1-300x300.jpg)
Reviews
There are no reviews yet.