BOXI 4pcs Front Inner and Outer Tie Rods for Toyota Tacoma 1998 1999 2000 2001 2002 2003 2004 (Pre Runner RWD) / Tacoma 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 (4WD) | EV433 ES3545 ES3546
BOXI SKU#: BXM00182-4
$50.45
BOXI 4-piece front inner & outer tie rod kit for Toyota Tacoma 1995-2004 (4WD & PreRunner RWD). Replaces OE# EV433, ES3545, ES3546. Verify fitment before ordering.
2 in stock
Placement on Vehicle: Front, Left, Right
Package Included:
1x Front Driver Side Outer Tie Rod End – ES3546
1x Front Passenger Side Outer Tie Rod End – ES3545
2x Front Inner Tie Rod Ends – EV433
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Toyota Tacoma 1998-2004 (Pre Runner RWD)
Replacement for Toyota Tacoma 1995-2004 (4WD)
Replacement OEM ( Original Equipment Part) Number: EV433 ES3545 ES3546
Package Included:
1x Front Driver Side Outer Tie Rod End – ES3546
1x Front Passenger Side Outer Tie Rod End – ES3545
2x Front Inner Tie Rod Ends – EV433
Placement on Vehicle: Front, Left, Right
| Weight | 7.01 lbs |
|---|---|
| Dimensions | 10.51 × 3.78 × 3.62 in |
| Brand | BOXI |
| Condition | New |
| Dust Boot Material | Chloroprene Rubber (CR) |
| Rod End Thread Gender | Male |
| Rack End Thread Gender | Male |
| Ball Stud Type | Threaded |
| Ball Stud Housing Material | High Strength Steel |
| Ball Stud Bearing Material | Polymer |
| Dust Boot Included | Yes |
| Adjusting Sleeve Included | No |
| Grease Fitting Included | No |
| Greaseable | No |
| Pre-Greased | Yes |
| Castle Nut Included | Yes |
| Cotter Pin Included | Yes |
| Lock Nut Included | Yes |
| Lock Washer Included | No |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1995 – 2004 | Toyota | Tacoma | Base | L4 – 2.4L 2438cc GAS MFI vin L type 2RZ-FE – 4 valve DOHC |
| L4 – 2.4L 2438cc GAS MFI vin U type 2RZ-FE – 4 valve DOHC | ||||
| L4 – 2.7L 2694cc GAS MFI vin M type 3RZ-FE – 4 valve DOHC | ||||
| L4 – 2.7L 2694cc GAS MFI vin U type 3RZ-FE – 4 valve DOHC | ||||
| V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC | ||||
| 1995 – 2003 | Toyota | Tacoma | DLX | L4 – 2.4L 2438cc GAS MFI vin L type 2RZ-FE – 4 valve DOHC |
| L4 – 2.4L 2438cc GAS MFI vin U type 2RZ-FE – 4 valve DOHC | ||||
| L4 – 2.7L 2694cc GAS MFI vin M type 3RZ-FE – 4 valve DOHC | ||||
| L4 – 2.7L 2694cc GAS MFI vin U type 3RZ-FE – 4 valve DOHC | ||||
| V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC | ||||
| 1998 – 2000 | Toyota | Tacoma | Limited | V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC |
| 1998 – 2004 | Toyota | Tacoma | Pre Runner | L4 – 2.7L 2694cc GAS MFI vin M type 3RZ-FE – 4 valve DOHC |
| V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC | ||||
| 1995 – 2000 | Toyota | Tacoma | SR5 | L4 – 2.4L 2438cc GAS MFI vin L type 2RZ-FE – 4 valve DOHC |
| L4 – 2.7L 2694cc GAS MFI vin M type 3RZ-FE – 4 valve DOHC | ||||
| V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00070-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00043-10
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Pre-GreasedYes
- Adjusting Sleeve IncludedNo
- Lock Nut IncludedYes
- Lock Washer IncludedNo
- Dust Boot IncludedNo
- Grease Fitting IncludedNo
- GreaseableNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00038-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
Reviews
There are no reviews yet.