BOXI 2pcs Front Inner Tie Rod Ends Fit for Toyota Sequoia 2001 2002 2003 2004 2005 2006 2007 / for Toyota Tundra 2000 2001 2002 2003 2004 2005 2006 | EV800444
BOXI SKU#: BXM600330058-2
$24.69
BOXI Front Inner Tie Rod Ends for Toyota Sequoia 2001-2007 and Tundra 2000-2006. Replaces OE number EV800444. Verify fitment before ordering.
37 in stock
Placement on Vehicle:Front, Left, Right
Package Included:2x Front Inner Tie Rod Ends – EV800444
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Replacement for Toyota Sequoia 2001-2007 All Models
Replacement for Toyota Tundra 2000-2006 All Models
Replacement OEM ( Original Equipment Part) Number: EV800444
Placement on Vehicle: Front, Left, Right
Package Included: 2x Front Inner Tie Rod Ends – EV800444
| Weight | 2.56 lbs |
|---|---|
| Dimensions | 10.12 × 3.86 × 2.28 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2001 – 2007 | Toyota | Sequoia | Limited SR5 | V8 – 4.7L 4663cc 285ci GAS MFI type 2UZ-FE – 4 valve DOHC |
| 2000 – 2006 | Toyota | Tundra | Base SR5 | V6 – 3.4L 3378cc GAS MFI vin N type 5VZ-FE – 4 valve DOHC |
| V6 – 4.0L 3956cc 241ci GAS MFI type 1GR-FE – 4 valve DOHC | ||||
| V8 – 4.7L 4663cc 285ci GAS MFI type 2UZ-FE – 4 valve DOHC | ||||
| Limited | V8 – 4.7L 4663cc 285ci GAS MFI type 2UZ-FE – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00093-4
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Pre-GreasedYes
- Grease Fitting IncludedNo
- Castle Nut IncludedYes
- GreaseableNo
- Cotter Pin IncludedYes
- Lock Nut IncludedNo
- Lock Washer IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00031-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialSintered Metal
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedNo
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400013-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400012-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
Reviews
There are no reviews yet.