BOXI (Set of 4) Front Inner & Outer Tie Rod Ends fit for Mercedes-Benz E300 1996-1999 / for Mercedes-Benz E320 E55 AMG 1996-2002 / for Mercedes-Benz E430 2002 / All RWD Models / EV437 ES3633 ES3632
BOXI SKU#: BXM600220006-4
$31.99
BOXI (Set of 4) front inner and outer tie rod ends for Mercedes-Benz E300, E320, E430, and E55 AMG (1996-2002 RWD models). Replaces OE numbers EV437, ES3633, ES3632. Verify fitment before ordering.
50 in stock
Placement on Vehicle:Front, Left, Right
Package Included:
2x Front Steering Inner Tie Rod Ends – EV437
1x Front Steering Outer Tie Rod End (Driver) – ES3633
1x Front Steering Outer Tie Rod End (Passenger) – ES3632
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Mercedes-Benz E300 1996-1999 All RWD Models (excludes 4-matic)
Fit for Mercedes-Benz E320 1996-2002 All RWD Models (excludes 4-matic)
Fit for Mercedes-Benz E430 2002 All RWD Models (excludes 4-matic)
Fit for Mercedes-Benz E55 AMG 1999-2002 All RWD Models (excludes 4-matic)
Fit OEM (Original Equipment Part) Number:EV437 ES3633 ES3632
Placement on Vehicle:Front, Left, Right
Kit Includes:
2x Front Steering Inner Tie Rod Ends – EV437
1x Front Steering Outer Tie Rod End (Driver) – ES3633
1x Front Steering Outer Tie Rod End (Passenger) – ES3632
| Weight | 4.51 lbs |
|---|---|
| Dimensions | 10.2 × 3.93 × 2.75 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 1996 – 1999 | Mercedes-Benz | E300 | Base | L6 – 3.0L 2996cc DIESEL MFI Turbocharged type 606.962 – 4 valve DOHC |
| L6 – 3.0L 2996cc DIESEL MFI type 606.912 – 4 valve DOHC | ||||
| 1996 – 2003 | Mercedes-Benz | E320 | Base | L6 – 3.2L 3199cc GAS MFI type 104.995 – 4 valve DOHC |
| V6 – 3.2L 3199cc GAS MFI type 112.941 – 3 valve SOHC | ||||
| V6 – 3.2L 3199cc GAS MFI type 112.947 – 3 valve SOHC | ||||
| V6 – 3.2L 3199cc GAS MFI type 112.949 – 3 valve SOHC | ||||
| V6 – 3.2L 3199cc GAS MPI – 3 valve DOHC | ||||
| 1997 | Mercedes-Benz | E420 | Avantgarde | V8 – 4.2L 4196cc 256ci GAS MPI – 4 valve DOHC |
| Base | V8 – 4.2L 4196cc 256ci GAS MPI – 4 valve DOHC | |||
| V8 – 4.2L 4196cc GAS MFI type 119.985 – 4 valve DOHC | ||||
| 1998 – 2002 | Mercedes-Benz | E430 | Base | V8 – 4.3L 4266cc 260ci GAS MPI – 3 valve SOHC |
| V8 – 4.3L 4266cc GAS MFI type 113.940 – 3 valve SOHC | ||||
| 1999 – 2002 | Mercedes-Benz | E55 AMG | Base | V8 – 5.4L 5439cc 332ci GAS MPI – 3 valve SOHC |
| V8 – 5.5L 5439cc 332ci GAS MFI type 113.984 – 3 valve SOHC |
Related products
-
Warranty: Two Year
- SKUBXM00093-4
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Pre-GreasedYes
- Grease Fitting IncludedNo
- Castle Nut IncludedYes
- GreaseableNo
- Cotter Pin IncludedYes
- Lock Nut IncludedNo
- Lock Washer IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00098-4
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Dust Boot MaterialChloroprene Rubber (CR)
- Rod End Thread GenderFemale
- Dust Boot IncludedYes
- Grease Fitting IncludedNo
- Pre-GreasedYes
- GreaseableNo
- Lock Nut IncludedYes
- Adjusting Sleeve IncludedNo
- Lock Washer IncludedNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00100-2
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Number Of Nuts2
- Dust Boot IncludedYes
- Bolts IncludedNo
- Lock Nuts IncludedYes
- Bushings IncludedNo
- GreaseableYes
- Sleeves IncludedNo
- Pre-GreasedYes
- Grease Fittings IncludedNo
- Washers IncludedNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00038-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.