BOXI (Set of 10) Front Rear Sway Bar End Link + Inner Outer Tie Rod Ends + Lower Ball Joints Fit for Hyundai Tiburon 2003 2004 2005 2006 2007 2008 | Replace K500031 EV80310 ES3377 K80508 K80509 K90360
BOXI SKU#: BXM600130004-10
$54.29
BOXI 10-piece front and rear suspension kit including sway bar end links, tie rod ends, and lower ball joints for Hyundai Tiburon 2003-2008. Replaces OEM parts K500031, EV80310, ES3377, K80508, K80509, K90360. Verify fitment before ordering.
11 in stock
Placement on Vehicle:Front, Rear, Left, Right
Package Included:
2x Front Lower Ball Joint – K500031
2x Front Inner Tie Rod End Link – EV80310
2x Front Outer Tie Rod End Link – ES3377
1x Front Stabilizer / Sway Bar End Link (Driver) – K80508
1x Front Stabilizer / Sway Bar End Link (Passenger) – K80509
2x Rear Stabilizer / Sway Bar End Link – K90360
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Hyundai Tiburon 2003 – 2008
Replacement OEM (Original Equipment Part) Number: K500031 EV80310 ES3377 K80508 K80509 K90360
Placement on Vehicle: Front, Rear, Left, Right
Package Included:
2x Front Lower Ball Joint – K500031
2x Front Inner Tie Rod End Link – EV80310
2x Front Outer Tie Rod End Link – ES3377
1x Front Stabilizer / Sway Bar End Link (Driver) – K80508
1x Front Stabilizer / Sway Bar End Link (Passenger) – K80509
2x Rear Stabilizer / Sway Bar End Link – K90360
| Weight | 9.15 lbs |
|---|---|
| Dimensions | 14.37 × 5.12 × 4.33 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2003 – 2004 | Hyundai | Tiburon | Base | L4 – 2.0L 1975cc GAS MFI – 4 valve DOHC |
| 2005 – 2008 | Hyundai | Tiburon | GS | L4 – 2.0L 1975cc GAS MFI – 4 valve DOHC |
| L4 – 2.0L 1975cc GAS MFI vin D – 4 valve DOHC | ||||
| SE | V6 – 2.7L 2656cc GAS MFI vin F – 4 valve DOHC | |||
| 2003 – 2008 | Hyundai | Tiburon | GT | V6 – 2.7L 2656cc GAS MFI vin F – 4 valve DOHC |
| 2007 – 2008 | Hyundai | Tiburon | GT Limited | V6 – 2.7L 2656cc GAS MFI vin F – 4 valve DOHC |
| 2008 | Hyundai | Tiburon | GTP | V6 – 2.7L 2656cc GAS MFI vin F – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBXM00057-6
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh-Strength Steel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Attachment MethodPress-In
- Ball Stud Thread Size3/4-16 Inch
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableYes
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00004-13
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX024012013-2
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00076-7
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Dust Boot MaterialChloroprene Rubber (CR)
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rack End Thread GenderMale
- Rod End Thread GenderFemale
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- GreaseableYes
- Grease Fitting IncludedNo
- Pre-GreasedYes
- Lock Washer IncludedNo
- Castle Nut IncludedYes
- Cotter Pin IncludedYes
- Lock Nut Included:Yes
- Warranty TermsTwo Year
![BOXI 7pc Front Tie Rods + Idler & Pitman Arms [4-Groove] Fit for Cadillac Escalade for Chevy Silverado Avalanche](https://assets.tetronauto.com/uploads/2024/12/BXM00076-7-1-300x300.jpg)
Reviews
There are no reviews yet.