BOXI (Set of 2) 1x Front Right Outer Tie Rod + 1x Front Left Outer Tie Rod Fit for Honda Accord 2003 2004 2005 2006 2007 / for Acura TSX 2004 2005 2006 2007 2008 | Replace ES80287 ES80288
BOXI SKU#: BXM600120022-2
$32.10
BOXI outer tie rod ends for Honda Accord 2003-2007 and Acura TSX 2004-2008. Replaces OE numbers ES80287 and ES80288. Verify fitment before ordering.
3 in stock
Placement on Vehicle: Front, Left, Right
Package Included:
1x Front Right Passenger Side Outer Tie Rod – ES80287
1x Front Left Driver Side Outer Tie Rod – ES80288
Please kindly check the YEAR/MAKE/MODEL of your vehicle based on our product description to make sure this item is compatible.
Fitment:
Fit for Honda Accord 2003 – 2007
Fit for Acura TSX 2004 – 2008
Replacement OEM (Original Equipment Part) Number: ES80287 ES80288
Placement on Vehicle: Front, Left, Right
Package Included:
1x Front Right Passenger Side Outer Tie Rod – ES80287
1x Front Left Driver Side Outer Tie Rod – ES80288
| Weight | 3.53 lbs |
|---|---|
| Dimensions | 9.06 × 3.15 × 3.15 in |
| Warranty Terms | Two Year |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2004 – 2008 | Acura | TSX | Base | L4 – 2.4L 2354cc 144ci GAS MFI type K24A2 – 4 valve DOHC |
| 2003 | Honda | Accord | Coupe | V6 – 3.0L 2997cc GAS MFI type J30A4 – 4 valve SOHC |
| 2003 – 2005 | Honda | Accord | DX | L4 – 2.4L 2354cc 144ci GAS MFI type K24A4 – 4 valve DOHC |
| 2003 – 2007 | Honda | Accord | EX LX | L4 – 2.4L 2354cc 144ci GAS MFI type K24A4 – 4 valve DOHC |
| L4 – 2.4L 2354cc 144ci GAS MFI type K24A8 – 4 valve DOHC | ||||
| V6 – 3.0L 2997cc GAS MFI type J30A4 – 4 valve SOHC | ||||
| V6 – 3.0L 2997cc GAS MFI type J30A5 – 4 valve SOHC | ||||
| 2007 | Honda | Accord | EX-L Special Edition | L4 – 2.4L 2354cc 144ci GAS MFI type K24A8 – 4 valve DOHC |
| V6 – 3.0L 2997cc GAS MFI type J30A5 – 4 valve SOHC | ||||
| LX SE | L4 – 2.4L 2354cc 144ci GAS MFI type K24A8 – 4 valve DOHC | |||
| 2005 – 2007 | Honda | Accord | Hybrid | V6 – 3.0L 2997cc FULL HYBRID EV-GAS MFI type JNA1 – 4 valve SOHC |
| 2006 | Honda | Accord | LX Special Edition | L4 – 2.4L 2354cc 144ci GAS MFI type K24A8 – 4 valve DOHC |
| 2005 | Honda | Accord | SE | L4 – 2.4L 2354cc 144ci GAS MFI type K24A4 – 4 valve DOHC |
| V6 – 3.0L 2997cc GAS MFI type J30A4 – 4 valve SOHC | ||||
| 2006 – 2007 | Honda | Accord | Value Package | L4 – 2.4L 2354cc 144ci GAS MFI type K24A8 – 4 valve DOHC |
Related products
-
Warranty: Two Year
- SKUBX02400002-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedYes
- Adjusting Sleeve IncludedNo
- Dust Boot MaterialChloroprene Rubber (CR)
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderFemale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedYes
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedYes
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedNo
- Dust Boot ColorBlack
- Lock Washer IncludedNo
- Fitment Type Direct Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00043-10
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialHigh Strength Steel
- Ball Stud Bearing MaterialPolymer
- Ball Stud TypeThreaded
- Rod End Thread GenderMale
- Rack End Thread GenderMale
- Pre-GreasedYes
- Adjusting Sleeve IncludedNo
- Lock Nut IncludedYes
- Lock Washer IncludedNo
- Dust Boot IncludedNo
- Grease Fitting IncludedNo
- GreaseableNo
- Castle Nut IncludedNo
- Cotter Pin IncludedNo
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBX02400003-1
- BrandBOXI
- ConditionNew
- Dust Boot IncludedNo
- Adjusting Sleeve IncludedNo
- Grease Fitting IncludedNo
- Rod End Thread GenderFemale
- GreaseableNo
- Rack End Thread GenderMale
- Pre-GreasedYes
- Ball Stud TypeThreaded
- Castle Nut IncludedNo
- Ball Stud Housing MaterialHigh Strength Steel
- Cotter Pin IncludedNo
- Ball Stud Bearing MaterialPolymer
- Lock Nut IncludedYes
- Lock Washer IncludedYes
- Fitment TypeDirect Replacement
- Warranty TermsTwo Year
-
Warranty: Two Year
- SKUBXM00038-8
- BrandBOXI
- ConditionNew
- Ball Stud Housing MaterialSteel
- Dust Boot MaterialNeoprene
- Ball Joint Bearing MaterialPolymer
- Ball Stud TypeTapered
- Attachment MethodPress-In
- Ball Stud Thread SizeM16-1.50
- Ball Stud Nut Wrench Size18mm
- AdjustableNo
- Dust Boot IncludedYes
- Locking Nut IncludedNo
- Grease Fitting IncludedYes
- C Clips IncludedYes
- Pre-GreasedYes
- GreaseableNo
- Castle Nut IncludedYes
- Washer IncludedNo
- Cotter Pin IncludedYes
- Mounting Plate IncludedNo
- Warranty TermsTwo Year
Reviews
There are no reviews yet.